Any harm over the teeth surfaces of a sprocket diminishes the lifestyle from the conveyor chain.
With typical sprockets, considerably worn sprocket teeth had been repaired by teeth padding or even the entire sprocket was replaced. In either situation, repair was pricey and with teeth padding, accuracy was impaired. We developed new sprockets with detachable teeth for independent substitute. This sprocket is extremely rated by our consumers for that dramatic savings in value and time.
Construction
The teeth can be replaced by two strategies: individual tooth replacement or sectional teeth replacement.
The bolts and nuts employed for mounting the teeth on on the sprocket are spot-welded to avoid loosening.
The respective structures are illustrated around the proper.
The above photograph and the major appropriate illustration present a sprocket for individual tooth replacement. Because the joint encounter amongst the replaced teeth and also the sprocket is formed in a unique arc, the bonding accuracy is high and also the sprocket power is enhanced. Furthermore, since the load acting about the mounting bolts is decreased, there is less chance of loosening. This sprocket construction is patented.
You will find two types of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are employed for large sprockets obtaining hefty loads and welded sheet steel hubs for other applications.