Product Description
Gear Rubber Coupling Connector Excavator Engine Parts SOLAR 210W-V SOLAR 015
Basic information:
Performace | Power Transmission |
Suitable | Excavator Engine Drive |
Feature | Excellent in resistance to heat, low temperature and oil |
Performance | Excellent in absorbing vibrations and shocks |
Application | Hyd.Pump shaft to Engine Flywheel |
Place of Origin | HangZhou,China(Mainland) |
Standard | Global Standards |
Name | Excavator hydraulic pump coupling |
Why choose us:
Quality Controll
Competitive price
OEM Service
Experience more than 20 years’ experience
Wholesaler We supply a wide range of spare parts for excavators
Main products:
Seal Series:
arm cylinder seal kit, Boom cylinder seal kit, Bucket cylinder seal kit, main pump seal kit, travel motor seal kit,
swing motor seal kit, control valve seal kit, center joint seal kit, track adjust seal kit, bushings,
floating seals, o-ring box, pusher, etc.
Engine parts:
cylinder heads, cylinder blocks, crankshafts, camshafts, connecting rods, water pumps, turbo chargers,
engine assys, fan blades, main bearing and connecting rod bearings, pistons, piston rings, liner kits, etc.
Hydraulic parts:
hydraulic cylinder assembly, gear pump assembly, hydraulic pump assembly, travel motor assembly, final drive assembly, swing motor assembly,
main valve assembly, service valves, gasket kits, etc.
Electric Parts:
solenoid valves, water sensors, pressure sensors, throttle motors, stop solenoid, controllers, monitors, etc.
Other Parts:
seal kits, bushings, floating seals, o-ring box, pushers, couplings, engine cushions, bearings, gears, fuel filter
oil filter, air filter, track link assy, front idler, carrier roller, hydraulic oil cooler, water tank, track link assy, etc.
Product show as below:
About us:
specialized in:
couplings, rubber mounts, gera parts, hydraulic seals and seal kits for hydraulic hammers, rock breakers, hydraulic excavators,wheel loaders, and JCB badkhoe loaders.
And, Our company also supply:
Engine parts, hydraulic piston pump and hydraulic travel motor, Swing motor assembly and hydraulic component parts, electric parts, etc. Hydraulic hammer breaker parts with piston, cylinder, chisel, through bolt, side bolt, top bush, front head bushing,accumlator, valve, etc.
We always try our best for all our customers and make it better and better. Welcome!
FAQ
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
How Does a Gear Coupling Handle Angular, Parallel, and Axial Misalignment?
Gear couplings are designed to handle various types of misalignment, including angular, parallel, and axial misalignment. Here’s how they handle each type:
- Angular Misalignment: Angular misalignment occurs when the two connected shafts are not collinear and form an angle with each other. Gear couplings can accommodate angular misalignment due to the flexibility of their gear teeth. The gear teeth allow a slight angular movement between the shafts without causing significant stress on the coupling.
- Parallel Misalignment: Parallel misalignment occurs when the two connected shafts are offset along their axis but remain parallel to each other. Gear couplings can handle parallel misalignment to some extent due to the slight axial movement allowed by the gear teeth. However, for larger parallel misalignments, special gear couplings with spacer elements or other features may be required.
- Axial Misalignment: Axial misalignment occurs when the two connected shafts are not in the same axial plane and have an offset along their length. Gear couplings can handle a certain degree of axial misalignment because the gear teeth can accommodate small axial movements without causing damage to the coupling or connected equipment.
The ability of gear couplings to handle misalignment is one of their key advantages over other types of couplings. The gear teeth act as flexible elements that can compensate for minor misalignments, reducing the stress and wear on the coupling and the connected equipment. However, it is essential to ensure that the misalignment remains within the allowable limits specified by the coupling manufacturer to maintain optimal performance and reliability.
editor by CX 2024-02-25
China Professional Gear Rubber Coupling Connector Excavator Engine Parts Solar 210W-V Solar 015 gear coupling
Product Description
Gear Rubber Coupling Connector Excavator Engine Parts SOLAR 210W-V SOLAR 015
Basic information:
Performace | Power Transmission |
Suitable | Excavator Engine Drive |
Feature | Excellent in resistance to heat, low temperature and oil |
Performance | Excellent in absorbing vibrations and shocks |
Application | Hyd.Pump shaft to Engine Flywheel |
Place of Origin | HangZhou,China(Mainland) |
Standard | Global Standards |
Name | Excavator hydraulic pump coupling |
Why choose us:
Quality Controll
Competitive price
OEM Service
Experience more than 20 years’ experience
Wholesaler We supply a wide range of spare parts for excavators
Main products:
Seal Series:
arm cylinder seal kit, Boom cylinder seal kit, Bucket cylinder seal kit, main pump seal kit, travel motor seal kit,
swing motor seal kit, control valve seal kit, center joint seal kit, track adjust seal kit, bushings,
floating seals, o-ring box, pusher, etc.
Engine parts:
cylinder heads, cylinder blocks, crankshafts, camshafts, connecting rods, water pumps, turbo chargers,
engine assys, fan blades, main bearing and connecting rod bearings, pistons, piston rings, liner kits, etc.
Hydraulic parts:
hydraulic cylinder assembly, gear pump assembly, hydraulic pump assembly, travel motor assembly, final drive assembly, swing motor assembly,
main valve assembly, service valves, gasket kits, etc.
Electric Parts:
solenoid valves, water sensors, pressure sensors, throttle motors, stop solenoid, controllers, monitors, etc.
Other Parts:
seal kits, bushings, floating seals, o-ring box, pushers, couplings, engine cushions, bearings, gears, fuel filter
oil filter, air filter, track link assy, front idler, carrier roller, hydraulic oil cooler, water tank, track link assy, etc.
Product show as below:
About us:
specialized in:
couplings, rubber mounts, gera parts, hydraulic seals and seal kits for hydraulic hammers, rock breakers, hydraulic excavators,wheel loaders, and JCB badkhoe loaders.
And, Our company also supply:
Engine parts, hydraulic piston pump and hydraulic travel motor, Swing motor assembly and hydraulic component parts, electric parts, etc. Hydraulic hammer breaker parts with piston, cylinder, chisel, through bolt, side bolt, top bush, front head bushing,accumlator, valve, etc.
We always try our best for all our customers and make it better and better. Welcome!
FAQ
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Selection of Gear Couplings for Specific Applications
Choosing the appropriate gear coupling for a specific application involves considering several factors to ensure optimal performance and reliability. Here are the key steps in the selection process:
- Identify Application Requirements: Understand the specific requirements of the application, including the torque and speed requirements, operating conditions, and the amount of angular and axial misalignment expected in the system.
- Calculate Torque and Speed: Determine the required torque and speed ratings for the gear coupling based on the power transmission needs of the application. Consider both peak and continuous torque requirements.
- Consider Misalignment: Evaluate the amount and type of misalignment that the gear coupling needs to accommodate. Different gear coupling designs have varying degrees of misalignment capabilities, so it’s essential to choose one that can handle the expected misalignment in the system.
- Check Space Constraints: Consider the available space for installing the gear coupling. Some applications may have limited space, requiring compact or specially designed couplings to fit properly.
- Assess Environmental Conditions: Determine if the application involves exposure to extreme temperatures, corrosive substances, or other harsh environmental factors. Select a gear coupling made from materials that can withstand the specific environmental conditions.
- Consider Maintenance Requirements: Evaluate the maintenance needs of the gear coupling. Some designs may require more frequent maintenance than others. For applications where regular maintenance is challenging, consider maintenance-free gear coupling options.
- Check Industry Standards and Certifications: Ensure that the selected gear coupling meets relevant industry standards and certifications to guarantee quality and safety.
- Consult with Experts: If needed, seek guidance from coupling manufacturers or engineering experts who can provide valuable insights and recommendations based on their experience and expertise.
By carefully considering these factors and understanding the specific demands of the application, you can select the most suitable gear coupling that will provide reliable and efficient power transmission while minimizing the risk of premature failure or downtime.
editor by CX 2024-01-10
China Standard Gear Rubber Coupling Connector Excavator Engine Parts Solar 210W-V Solar 015 gear coupling
Product Description
Gear Rubber Coupling Connector Excavator Engine Parts SOLAR 210W-V SOLAR 015
Basic information:
Performace | Power Transmission |
Suitable | Excavator Engine Drive |
Feature | Excellent in resistance to heat, low temperature and oil |
Performance | Excellent in absorbing vibrations and shocks |
Application | Hyd.Pump shaft to Engine Flywheel |
Place of Origin | HangZhou,China(Mainland) |
Standard | Global Standards |
Name | Excavator hydraulic pump coupling |
Why choose us:
Quality Controll
Competitive price
OEM Service
Experience more than 20 years’ experience
Wholesaler We supply a wide range of spare parts for excavators
Main products:
Seal Series:
arm cylinder seal kit, Boom cylinder seal kit, Bucket cylinder seal kit, main pump seal kit, travel motor seal kit,
swing motor seal kit, control valve seal kit, center joint seal kit, track adjust seal kit, bushings,
floating seals, o-ring box, pusher, etc.
Engine parts:
cylinder heads, cylinder blocks, crankshafts, camshafts, connecting rods, water pumps, turbo chargers,
engine assys, fan blades, main bearing and connecting rod bearings, pistons, piston rings, liner kits, etc.
Hydraulic parts:
hydraulic cylinder assembly, gear pump assembly, hydraulic pump assembly, travel motor assembly, final drive assembly, swing motor assembly,
main valve assembly, service valves, gasket kits, etc.
Electric Parts:
solenoid valves, water sensors, pressure sensors, throttle motors, stop solenoid, controllers, monitors, etc.
Other Parts:
seal kits, bushings, floating seals, o-ring box, pushers, couplings, engine cushions, bearings, gears, fuel filter
oil filter, air filter, track link assy, front idler, carrier roller, hydraulic oil cooler, water tank, track link assy, etc.
Product show as below:
About us:
specialized in:
couplings, rubber mounts, gera parts, hydraulic seals and seal kits for hydraulic hammers, rock breakers, hydraulic excavators,wheel loaders, and JCB badkhoe loaders.
And, Our company also supply:
Engine parts, hydraulic piston pump and hydraulic travel motor, Swing motor assembly and hydraulic component parts, electric parts, etc. Hydraulic hammer breaker parts with piston, cylinder, chisel, through bolt, side bolt, top bush, front head bushing,accumlator, valve, etc.
We always try our best for all our customers and make it better and better. Welcome!
FAQ
What Is a Gear Coupling and How Does It Work?
A gear coupling is a type of mechanical coupling that connects two shafts together to transmit torque and rotational motion between them. It consists of two gear-like hubs with external teeth that mesh together and transmit torque via the engagement of the teeth. The gear teeth on the hubs allow for high torque transmission and provide flexibility to accommodate misalignments between the shafts.
The working principle of a gear coupling can be summarized as follows:
1. Gear Hubs: A gear coupling consists of two hubs, each attached to the respective shafts that need to be connected. The hubs have external gear teeth that mesh together when the coupling is assembled.
2. Gear Teeth Engagement: When the two gear hubs are brought together during installation, the gear teeth on one hub mesh with the corresponding teeth on the other hub. This meshing creates a strong mechanical connection between the two shafts.
3. Torque Transmission: As the connected shafts rotate, the gear teeth engage and transmit torque from one shaft to the other. The gear coupling can handle high torque loads, making it suitable for heavy-duty applications.
4. Misalignment Compensation: One of the key advantages of a gear coupling is its ability to accommodate various types of misalignment, including angular, parallel, and axial misalignments between the connected shafts. This misalignment compensation helps reduce stress on the connected equipment and prevents premature wear.
5. Lubrication: Gear couplings may require lubrication to reduce friction between the gear teeth and ensure smooth operation. Proper lubrication helps improve the efficiency and longevity of the coupling.
Gear couplings are commonly used in various industrial applications, such as power generation, steel mills, mining, and heavy machinery. They offer high torque capacity, excellent misalignment accommodation, and reliability, making them a preferred choice for transmitting power in demanding environments.
editor by CX 2023-08-22
China Good quality High Performance Adjustable Engine Cam Gear near me supplier
Product Description
JDM Performance Adjustable Engine Cam Gear
ODM & OEM Aluminum Cam Gear.
You can customize the special type of the Cam Gear, we will produce the Cam Gear according to your drawing or sample.
There are 9 colors of Cam Gear: Red, green, gray, blue, black, orange, purple, silver, gold.
There are kinds of surface treatment for Cam Gear: Anodize, Neo chrome, Polish, sandblast.
We specialize in automation machines, CNC machining parts, covering turning, milling, wire EDM cutting, etc. With 13 years experience. Please send us drawings or samples with details technical requirement. We can design drawings for customers base on provided information.
Why Cooperate With HangZhou Xiangjin Precision Machinery Co., Ltd
Price– competitive price
Reasonable and competitive according to your drawings
Quality– quality insurance
To ensure correct standard and choose equivalent standard for material and technique requirements, before running, we would like to provide formal material certificate showing chemical compositions and property, also if you need, we can provide control plan, showing processing and inspection tooling; — quality control Workers will inspect in their own process, 100% inspection for all dimensions before deliver goods.
Delivery time– short delivery time
We have professional R&D team, advanced equipment, skilled workers, which can bring high working efficiency.
Customer Service–
E-mail your suggestions or complaints, and we will handle them ASAP. Perfect after-sale service.
Equipment | Quantity |
CNC machining centre | 14(contain 4axis processing centre) |
CNC milling machine | 2 |
CNC lathe | 8 |
Cutting machine | 4 |
Three – Comero | 1 |
Welding machine | 4 |
Punch | 2 |
Blister packaging machine | 1 |
Vibratory fininshing machine | 2 |
Other machine | 20 |
Equipment | Quantity |
CNC machining centre | 14(contain 4axis processing centre) |
CNC milling machine | 2 |
CNC lathe | 8 |
Cutting machine | 4 |
Three – Comero | 1 |
Welding machine | 4 |
Punch | 2 |
Blister packaging machine | 1 |
Vibratory fininshing machine | 2 |
Other machine | 20 |
Types of Bevel Gears
Bevel Gears are used in a number of industries. They are used in wheeled excavators, dredges, conveyor belts, mill actuators, and rail transmissions. A bevel gear’s spiral or angled bevel can make it suitable for confined spaces. It is also used in robotics and vertical supports of rolling mills. You can use bevel gears in food processing processes. For more information on bevel gears, read on.
Spiral bevel gear
Spiral bevel gears are used to transmit power between two shafts in a 90-degree orientation. They have curved or oblique teeth and can be fabricated from various metals. Bestagear is one manufacturer specializing in medium to large spiral bevel gears. They are used in the mining, metallurgical, marine, and oil fields. Spiral bevel gears are usually made from steel, aluminum, or phenolic materials.
Spiral bevel gears have many advantages. Their mesh teeth create a less abrupt force transfer. They are incredibly durable and are designed to last a long time. They are also less expensive than other right-angle gears. They also tend to last longer, because they are manufactured in pairs. The spiral bevel gear also reduces noise and vibration from its counterparts. Therefore, if you are in need of a new gear set, spiral bevel gears are the right choice.
The contact between spiral bevel gear teeth occurs along the surface of the gear tooth. The contact follows the Hertz theory of elastic contact. This principle holds for small significant dimensions of the contact area and small relative radii of curvature of the surfaces. In this case, strains and friction are negligible. A spiral bevel gear is a common example of an inverted helical gear. This gear is commonly used in mining equipment.
Spiral bevel gears also have a backlash-absorbing feature. This feature helps secure the thickness of the oil film on the gear surface. The shaft axis, mounting distance, and angle errors all affect the tooth contact on a spiral bevel gear. Adjusting backlash helps to correct these problems. The tolerances shown above are common for bevel gears. In some cases, manufacturers make slight design changes late in the production process, which minimizes the risk to OEMs.
Straight bevel gear
Straight bevel gears are among the easiest types of gears to manufacture. The earliest method used to manufacture straight bevel gears was to use a planer equipped with an indexing head. However, improvements have been made in manufacturing methods after the introduction of the Revacycle system and the Coniflex. The latest technology allows for even more precise manufacturing. Both of these manufacturing methods are used by CZPT. Here are some examples of straight bevel gear manufacturing.
A straight bevel gear is manufactured using two kinds of bevel surfaces, namely, the Gleason method and the Klingelnberg method. Among the two, the Gleason method is the most common. Unlike other types of gear, the CZPT method is not a universal standard. The Gleason system has higher quality gears, since its adoption of tooth crowning is the most effective way to make gears that tolerate even small assembly errors. It also eliminates the stress concentration in the bevelled edges of the teeth.
The gear’s composition depends on the application. When durability is required, a gear is made of cast iron. The pinion is usually three times harder than the gear, which helps balance wear. Other materials, such as carbon steel, are cheaper, but are less resistant to corrosion. Inertia is another critical factor to consider, since heavier gears are more difficult to reverse and stop. Precision requirements may include the gear pitch and diameter, as well as the pressure angle.
Involute geometry of a straight bevel gear is often computed by varying the surface’s normal to the surface. Involute geometry is computed by incorporating the surface coordinates and the theoretical tooth thickness. Using the CMM, the spherical involute surface can be used to determine tooth contact patterns. This method is useful when a roll tester tooling is unavailable, because it can predict the teeth’ contact pattern.
Hypoid bevel gear
Hypoid bevel gears are an efficient and versatile speed reduction solution. Their compact size, high efficiency, low noise and heat generation, and long life make them a popular choice in the power transmission and motion control industries. The following are some of the benefits of hypoid gearing and why you should use it. Listed below are some of the key misperceptions and false assumptions of this gear type. These assumptions may seem counterintuitive at first, but will help you understand what this gear is all about.
The basic concept of hypoid gears is that they use two non-intersecting shafts. The smaller gear shaft is offset from the larger gear shaft, allowing them to mesh without interference and support each other securely. The resulting torque transfer is improved when compared to conventional gear sets. A hypoid bevel gear is used to drive the rear axle of an automobile. It increases the flexibility of machine design and allows the axes to be freely adjusted.
In the first case, the mesh of the two bodies is obtained by fitting the hyperboloidal cutter to the desired gear. Its geometric properties, orientation, and position determine the desired gear. The latter is used if the desired gear is noise-free or is required to reduce vibrations. A hyperboloidal cutter, on the other hand, meshes with two toothed bodies. It is the most efficient option for modeling hypoid gears with noise concerns.
The main difference between hypoid and spiral bevel gears is that the hypoid bevel gear has a larger diameter than its counterparts. They are usually found in 1:1 and 2:1 applications, but some manufacturers also provide higher ratios. A hypoid gearbox can achieve speeds of three thousand rpm. This makes it the preferred choice in a variety of applications. So, if you’re looking for a gearbox with a high efficiency, this is the gear for you.
Addendum and dedendum angles
The addendum and dedendum angles of a bevel gear are used to describe the shape and depth of the teeth of the gear. Each tooth of the gear has a slightly tapered surface that changes in depth. These angles are defined by their addendum and dedendum distances. Addendum angle is the distance between the top land and the bottom surface of the teeth, while dedendum angle is the distance between the pitch surface and the bottom surface of the teeth.
The pitch angle is the angle formed by the apex point of the gear’s pitch cone with the pitch line of the gear shaft. The dedendum angle, on the other hand, is the depth of the tooth space below the pitch line. Both angles are used to measure the shape of a bevel gear. The addendum and dedendum angles are important for gear design.
The dedendum and addendum angles of a bevel gear are determined by the base contact ratio (Mc) of the two gears. The involute curve is not allowed to extend within the base diameter of the bevel gear. The base diameter is also a critical measurement for the design of a gear. It is possible to reduce the involute curve to match the involute curve, but it must be tangential to the involute curve.
The most common application of a bevel gear is the automotive differential. They are used in many types of vehicles, including cars, trucks, and even construction equipment. They are also used in the marine industry and aviation. Aside from these two common uses, there are many other uses for bevel gears. And they are still growing in popularity. But they’re a valuable part of automotive and industrial gearing systems.
Applications of bevel gears
Bevel gears are used in a variety of applications. They are made of various materials depending on their weight, load, and application. For high-load applications, ferrous metals such as grey cast iron are used. These materials have excellent wear resistance and are inexpensive. For lower-weight applications, steel or non-metals such as plastics are used. Some bevel gear materials are considered noiseless. Here are some of their most common uses.
Straight bevel gears are the easiest to manufacture. The earliest method of manufacturing them was with a planer with an indexing head. Modern manufacturing methods introduced the Revacycle and Coniflex systems. For industrial gear manufacturing, the CZPT uses the Revacycle system. However, there are many types of bevel gears. This guide will help you choose the right material for your next project. These materials can withstand high rotational speeds and are very strong.
Bevel gears are most common in automotive and industrial machinery. They connect the driveshaft to the wheels. Some even have a 45-degree bevel. These gears can be placed on a bevel surface and be tested for their transmission capabilities. They are also used in testing applications to ensure proper motion transmission. They can reduce the speed of straight shafts. Bevel gears can be used in many industries, from marine to aviation.
The simplest type of bevel gear is the miter gear, which has a 1:1 ratio. It is used to change the axis of rotation. The shafts of angular miter bevel gears can intersect at any angle, from 45 degrees to 120 degrees. The teeth on the bevel gear can be straight, spiral, or Zerol. And as with the rack and pinion gears, there are different types of bevel gears.
in Manama Bahrain sales price shop near me near me shop factory supplier Flywheel Ring Gear 3902127 for Cummins Engine manufacturer best Cost Custom Cheap wholesaler
We can source a entire-selection of energy transmission products like chains, sprockets and plate wheels, pulleys, gearboxes, motors, couplings, gears and racks. At any time-Power Group CO., LTD. IS Specialist IN Creating ALL Kinds OF MECHANICAL TRANSMISSION AND HYDRAULIC TRANSMISSION LIKE: PLANETARY GEARBOXES, WORM REDUCERS, IN-LINE HELICAL Equipment Speed REDUCERS, PARALLEL SHAFT HELICAL Gear REDUCERS, HELICAL BEVEL REDUCERS, HELICAL WORM Equipment REDUCERS, AGRICULTURAL GEARBOXES, TRACTOR GEARBOXES, Automobile GEARBOXES, PTO Travel SHAFTS, Specific REDUCER & Related Gear Components AND OTHER Relevant Items, SPROCKETS, HYDRAULIC Method, VACCUM PUMPS, FLUID COUPLING, Gear RACKS, CHAINS, TIMING PULLEYS, UDL Speed VARIATORS, V PULLEYS, HYDRAULIC CYLINDER, Gear PUMPS, SCREW AIR COMPRESSORS, SHAFT COLLARS Lower BACKLASH WORM REDUCERS AND SO ON. We have exported our products to Korea, Turkey, Bulgaria, Romania, Russia, Italy, Norway, the Usa, Canada, etc. engine flywheel ring EPT 3957127
EPTT details
WeiEPTT EPT EPTTry EPT EPTT,Ltd is situated in EPTT EPTT EPTT-WeiEPTT,which is EPTTized in diesel engine,generator set,agricultural EPTTry and spare elements.
Our principal merchandise are WeiEPTT EPTT sequence diesel engines,which apply to EPT,bus,making tools,building EPTTry,maritime,agricultural EPTTry and so on.
With the international financial integration,we hold the basic principle of quotEPTT initial,Customer foremost quot,committed service to consumers nationwide and overseas!
We provide all equipment for diesel motor,like cylinEPTThead,cylinEPTThead go over,cylinEPTTblock,alternator,turbocharger,piston,piston ring,piston pin,liner,crankshaft,cam shaft,principal bearing,connecting rod,connecting rod bearing,h2o pump,oil pump,injector,gasoline EPT pump,starter motor,supporter,belt,gasket,oil pan,flywheel,consumption valve,exhaust valve and so on.
Brand name:EPT Deutz,Steyr
Utilize to:construction EPTTry,marine,EPT hefty EPT,bus.
product manufacturer | weichai | Deutz | EPT | EPT | Cummin |
cylinEPTThead | radic | radic | radic | radic | radic |
cylinEPTThead go over | radic | radic | radic | radic | radic |
cylinEPTTblock | radic | radic | radic | radic | radic |
alternator | radic | radic | radic | radic | radic |
turbocharger | radic | radic | radic | radic | radic |
piston | radic | radic | radic | radic | radic |
piston ring | radic | radic | radic | radic | radic |
piston pin | radic | radic | radic | radic | radic |
liner | radic | radic | radic | radic | radic |
crankshaft | radic | radic | radic | radic | radic |
cam shaft | radic | radic | radic | radic | radic |
principal bearing | radic | radic | radic | radic | radic |
connecting rod | radic | radic | radic | radic | radic |
connecting rod bearing | radic | radic | radic | radic | radic |
water pump | radic | radic | radic | radic | radic |
oil pump | radic | radic | radic | radic | radic |
injector | radic | radic | radic | radic | radic |
gasoline EPT pump | radic | radic | radic | radic | radic |
starter motor | radic | radic | radic | radic | radic |
supporter | radic | radic | radic | radic | radic |
belt | radic | radic | radic | radic | radic |
gasket | radic | radic | radic | radic | radic |
oil pan | radic | radic | radic | radic | radic |
flywheel | radic | radic | radic | radic | radic |
consumption valve | radic | radic | radic | radic | radic |
exhaust valve | radic | radic | radic | radic | radic |
China manufacturer & factory supplier for high in Sanliurfa Turkey quality Sewing Machine Speed Cycloidal Reducer for sale pvc reducer 3 4 inch gear box transmission box gear box with engine With high quality best price & service
ISO 9001, ISO/TS 16949 and AS9100 certified. Producer of standard and customized roller chains for use in a extensive assortment of purposes. Roller chains are available in solitary-pitch, double-pitch and precision versions. Satisfies or exceed ANSI requirements. we have obtained the believe in of consumers worldwide. a specialized supplier of a total selection of chains, sprockets, gears, equipment racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….
Overview
Rapid Details
- Applicable Industries:
-
Accommodations, Garment Stores, Creating Materials Shops, Production Plant, Equipment Fix Outlets, Foods & Beverage Manufacturing unit, Farms, Cafe, Residence Use, Retail, Foodstuff Shop, Printing Retailers, Energy & Mining, Foodstuff & Beverage Stores, Marketing Firm, Construction works
- Place of Origin:Zhejiang, China
- Underneath the advice of managerial perception of “Serving agriculture, scoring a success by means of high quality of goods and honesty in company”, our products have been dependable by clientele and have received a bigger share of marketplace.
Manufacturer Identify: -
OEM
- Gearing Arrangement:
-
Cycloidal
- Output Torque:
-
70N.m~20000N.m
- Input Speed:
-
750-1500rpm
- Output Pace:
-
.3~136rpm
- Ratio:
-
6-5133
- Worm gear reducers are utilised in low to moderate horsepower apps. They offer you minimal preliminary value, higher ratios, and higher output torque in a modest package. Worm gear reducers have a much larger tolerance for shock loading then helical equipment reducers. Numerous worm equipment reducers are interchangeable between companies. Cycloidal Wheel:
-
Be grinded
- Certification:
-
ISO9001-2008
- Sample:
-
Accessible
Source Capability
- Provide Capacity:
- 50000 Established/Sets for every Year
Packaging & Shipping
- Packaging Information
- or as requestes”>Stanard wooden case, or wood pallet
or as requestes
- Port
- Ningbo or Shanghai Port
-
Guide Time
: -
Amount(Boxes) 1 – 5 >5 Est. Time(days) 35 To be negotiated
The lemon tube is suited for transmissible electrical power of sixteen-35HP, it is the preferred selection for higher speeds and low torque transmission. The two-lobe lemon tube grants reduced vibrations up to 2600 rpm with lengths not exceeding 800mm. AC sequence with 6-lobe tubes (star)
On the internet Customization
Product Description
Swift Information:
Variety: XB sequence Cycloidal Pin Wheel Velocity Reducer Input Velocity: 1000-1500rmp Output Velocity: .3-280rpm
Certification: ISO9001 CE Ex Electrical power:.09-55KW Warranty: 1Years
Product Title |
X/B Sequence vertical variety cycloidal reducer |
The Gear Materials |
GCR15 |
The situation Content |
Forged Iron |
Color |
Blue,Eco-friendly, or Customized |
HS Code |
84834090 |
Model |
Tianjin X / Shanghai B / Chemical Industy Normal B / Built-in Regular B Jiangmen JXJ |
Shipping time |
X standard 5 woking times |
Brand name |
TIANGOU |
Certifications
Trade Displays
Packaging & Transport
Packing Details : Standard carton/Pallet/Regular wooden situation
Supply Details : 15-30 working days upon payment
Firm Information
other series item
Precision Planetary gearbox | Robot RV gearbox pace reducer |
Personalized manufactured Non-normal Gearbox | UDL Series Variator |
PYZ Sequence Helical Tooth Shaft Mounted Reducer | 8000 Collection Cycloidal Reducer |
SLT Series Spiral Bevel Gearbox | SLSWL Series Worm Screw Jack |
SLP Series Planetary Reducer | SLH/SLB Sequence High Energy Reducer |
NMRV Sequence Worm Reducer | BKM Collection Helical-hypoid Reducer |
SLRC Sequence Helical Reducer | SLSMR Series Shaft Mounted Reducer |
SLXG Series Shaft Mounted Reducer | X/B Sequence Cycloidal Reducer |
SLR/SLF/SLK/SLS Sequence Helical Reducer |
Relevant Merchandise
Contact