Product Description
Flexible flex Fluid Chain Jaw flange Gear Rigid Spacer PIN HRC MH NM universal Fenaflex Oldham spline clamp tyre grid hydraulic servo motor shaft Coupling
Product Description
The function of Shaft coupling:
1. Shafts for connecting separately manufactured units such as motors and generators.
2. If any axis is misaligned.
3. Provides mechanical flexibility.
4. Absorb the transmission of impact load.
5. Prevent overload
We can provide the following couplings.
| Rigid coupling | Flange coupling | Oldham coupling |
| Sleeve or muff coupling | Gear coupling | Bellow coupling |
| Split muff coupling | Flexible coupling | Fluid coupling |
| Clamp or split-muff or compression coupling | Universal coupling | Variable speed coupling |
| Bushed pin-type coupling | Diaphragm coupling | Constant speed coupling |
Company Profile
We are an industrial company specializing in the production of couplings. It has 3 branches: steel casting, forging, and heat treatment. Main products: cross shaft universal coupling, drum gear coupling, non-metallic elastic element coupling, rigid coupling, etc.
The company mainly produces the industry standard JB3241-91 swap JB5513-91 swc. JB3242-93 swz series universal coupling with spider type. It can also design and produce various non-standard universal couplings, other couplings, and mechanical products for users according to special requirements. Currently, the products are mainly sold to major steel companies at home and abroad, the metallurgical steel rolling industry, and leading engine manufacturers, with an annual production capacity of more than 7000 sets.
The company’s quality policy is “quality for survival, variety for development.” In August 2000, the national quality system certification authority audited that its quality assurance system met the requirements of GB/T19002-1994 IDT ISO9002:1994 and obtained the quality system certification certificate with the registration number 0900B5711. It is the first enterprise in the coupling production industry in HangZhou City that passed the ISO9002 quality and constitution certification.
The company pursues the business purpose of “reliable quality, the supremacy of reputation, commitment to business and customer satisfaction” and welcomes customers at home and abroad to choose our products.
At the same time, the company has established long-term cooperative relations with many enterprises and warmly welcomes friends from all walks of life to visit, investigate and negotiate business!
How to use the coupling safely
The coupling is an intermediate connecting part of each motion mechanism, which directly impacts the regular operation of each motion mechanism. Therefore, attention must be paid to:
1. The coupling is not allowed to have more than the specified axis deflection and radial displacement so as not to affect its transmission performance.
2. The bolts of the LINS coupling shall not be loose or damaged.
3. Gear coupling and cross slide coupling shall be lubricated regularly, and lubricating grease shall be added every 2-3 months to avoid severe wear of gear teeth and serious consequences.
4. The tooth width contact length of gear coupling shall not be less than 70%; Its axial displacement shall not be more significant than 5mm
5. The coupling is not allowed to have cracks. If there are cracks, it needs to be replaced (they can be knocked with a small hammer and judged according to the sound).
6. The keys of LINS coupling shall be closely matched and shall not be loosened.
7. The tooth thickness of the gear coupling is worn. When the lifting mechanism exceeds 15% of the original tooth thickness, the operating mechanism exceeds 25%, and the broken tooth is also scrapped.
8. If the elastic ring of the pin coupling and the sealing ring of the gear coupling is damaged or aged, they should be replaced in time.
Certifications
Packaging & Shipping
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Limitations and Disadvantages of Using Gear Couplings
While gear couplings offer many advantages, they also have some limitations and disadvantages that should be considered when selecting coupling solutions for specific applications:
- Cost: Gear couplings can be more expensive compared to other types of couplings, especially when precision machining or specialized materials are required. The initial investment might be higher, but the long-term benefits may outweigh the cost.
- Size and Weight: Gear couplings are generally larger and heavier than some other coupling types. This can impact the overall size and weight of the machinery, which may be a concern in applications with limited space or weight restrictions.
- Maintenance: Gear couplings require regular maintenance, including lubrication and periodic inspection to ensure proper functioning. Neglecting maintenance can lead to premature wear and failure.
- Backlash: Like other gear mechanisms, gear couplings may have some inherent backlash due to the clearance between gear teeth. This slight play can affect precision applications where accurate motion transmission is critical.
- Noise and Vibration: Gear couplings can generate more noise and vibration compared to flexible couplings, especially at higher speeds. This can be a concern in applications that require low-noise operation.
- Misalignment Tolerance: While gear couplings can handle moderate misalignment, they may not be as forgiving as flexible couplings in accommodating significant shaft misalignment.
Despite these limitations, gear couplings remain a popular choice for many applications, particularly in heavy-duty industrial settings where they excel in transmitting high torque and handling demanding conditions. Proper selection, installation, and maintenance can help mitigate some of the disadvantages, making gear couplings a reliable choice for power transmission in various industries.
editor by CX 2024-03-10
China manufacturer Flexible Flex Fluid Chain Jaw Flange Gear Rigid Spacer Pin HRC Mh Nm Universal Fenaflex Oldham Spline Clamp Tyre Grid Hydraulic Servo Motor Shaft Coupling gear coupling
Product Description
Flexible flex Fluid Chain Jaw flange Gear Rigid Spacer PIN HRC MH NM universal Fenaflex Oldham spline clamp tyre grid hydraulic servo motor shaft Coupling
Product Description
The function of Shaft coupling:
1. Shafts for connecting separately manufactured units such as motors and generators.
2. If any axis is misaligned.
3. Provides mechanical flexibility.
4. Absorb the transmission of impact load.
5. Prevent overload
We can provide the following couplings.
| Rigid coupling | Flange coupling | Oldham coupling |
| Sleeve or muff coupling | Gear coupling | Bellow coupling |
| Split muff coupling | Flexible coupling | Fluid coupling |
| Clamp or split-muff or compression coupling | Universal coupling | Variable speed coupling |
| Bushed pin-type coupling | Diaphragm coupling | Constant speed coupling |
Company Profile
We are an industrial company specializing in the production of couplings. It has 3 branches: steel casting, forging, and heat treatment. Main products: cross shaft universal coupling, drum gear coupling, non-metallic elastic element coupling, rigid coupling, etc.
The company mainly produces the industry standard JB3241-91 swap JB5513-91 swc. JB3242-93 swz series universal coupling with spider type. It can also design and produce various non-standard universal couplings, other couplings, and mechanical products for users according to special requirements. Currently, the products are mainly sold to major steel companies at home and abroad, the metallurgical steel rolling industry, and leading engine manufacturers, with an annual production capacity of more than 7000 sets.
The company’s quality policy is “quality for survival, variety for development.” In August 2000, the national quality system certification authority audited that its quality assurance system met the requirements of GB/T19002-1994 IDT ISO9002:1994 and obtained the quality system certification certificate with the registration number 0900B5711. It is the first enterprise in the coupling production industry in HangZhou City that passed the ISO9002 quality and constitution certification.
The company pursues the business purpose of “reliable quality, the supremacy of reputation, commitment to business and customer satisfaction” and welcomes customers at home and abroad to choose our products.
At the same time, the company has established long-term cooperative relations with many enterprises and warmly welcomes friends from all walks of life to visit, investigate and negotiate business!
How to use the coupling safely
The coupling is an intermediate connecting part of each motion mechanism, which directly impacts the regular operation of each motion mechanism. Therefore, attention must be paid to:
1. The coupling is not allowed to have more than the specified axis deflection and radial displacement so as not to affect its transmission performance.
2. The bolts of the LINS coupling shall not be loose or damaged.
3. Gear coupling and cross slide coupling shall be lubricated regularly, and lubricating grease shall be added every 2-3 months to avoid severe wear of gear teeth and serious consequences.
4. The tooth width contact length of gear coupling shall not be less than 70%; Its axial displacement shall not be more significant than 5mm
5. The coupling is not allowed to have cracks. If there are cracks, it needs to be replaced (they can be knocked with a small hammer and judged according to the sound).
6. The keys of LINS coupling shall be closely matched and shall not be loosened.
7. The tooth thickness of the gear coupling is worn. When the lifting mechanism exceeds 15% of the original tooth thickness, the operating mechanism exceeds 25%, and the broken tooth is also scrapped.
8. If the elastic ring of the pin coupling and the sealing ring of the gear coupling is damaged or aged, they should be replaced in time.
Certifications
Packaging & Shipping
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Handling Misalignment with Gear Couplings
Gear couplings are designed to accommodate certain degrees of misalignment between shafts, making them suitable for applications where some flexibility is required. They can handle three main types of misalignment:
- Angular Misalignment: This type of misalignment occurs when the axes of the two connected shafts are not parallel but intersect at a small angle. Gear couplings can handle a moderate amount of angular misalignment, typically up to a few degrees, without sacrificing performance.
- Parallel Misalignment: Parallel misalignment refers to a situation where the two connected shafts are offset in parallel but remain parallel to each other. Gear couplings can accommodate a certain amount of parallel misalignment, but it is generally limited to a fraction of the coupling’s overall length.
- Axial Misalignment: Axial misalignment happens when the two shafts are offset along the axis of rotation. Gear couplings can handle limited axial misalignment, but it is essential to ensure that the coupling’s end float or end-play is correctly set to prevent axial loading on connected equipment.
It is important to note that while gear couplings can handle some degree of misalignment, excessive misalignment can lead to premature wear and failure. Regular maintenance and proper installation are crucial to ensuring that gear couplings perform optimally and have a longer service life.
editor by CX 2024-02-26
China factory Flexible Flex Fluid Chain Jaw Flange Gear Rigid Spacer Pin HRC Mh Nm Universal Fenaflex Oldham Spline Clamp Tyre Grid Hydraulic Servo Motor Shaft Coupling gear coupling
Product Description
Flexible flex Fluid Chain Jaw flange Gear Rigid Spacer PIN HRC MH NM universal Fenaflex Oldham spline clamp tyre grid hydraulic servo motor shaft Coupling
Product Description
The function of Shaft coupling:
1. Shafts for connecting separately manufactured units such as motors and generators.
2. If any axis is misaligned.
3. Provides mechanical flexibility.
4. Absorb the transmission of impact load.
5. Prevent overload
We can provide the following couplings.
| Rigid coupling | Flange coupling | Oldham coupling |
| Sleeve or muff coupling | Gear coupling | Bellow coupling |
| Split muff coupling | Flexible coupling | Fluid coupling |
| Clamp or split-muff or compression coupling | Universal coupling | Variable speed coupling |
| Bushed pin-type coupling | Diaphragm coupling | Constant speed coupling |
Company Profile
We are an industrial company specializing in the production of couplings. It has 3 branches: steel casting, forging, and heat treatment. Main products: cross shaft universal coupling, drum gear coupling, non-metallic elastic element coupling, rigid coupling, etc.
The company mainly produces the industry standard JB3241-91 swap JB5513-91 swc. JB3242-93 swz series universal coupling with spider type. It can also design and produce various non-standard universal couplings, other couplings, and mechanical products for users according to special requirements. Currently, the products are mainly sold to major steel companies at home and abroad, the metallurgical steel rolling industry, and leading engine manufacturers, with an annual production capacity of more than 7000 sets.
The company’s quality policy is “quality for survival, variety for development.” In August 2000, the national quality system certification authority audited that its quality assurance system met the requirements of GB/T19002-1994 IDT ISO9002:1994 and obtained the quality system certification certificate with the registration number 0900B5711. It is the first enterprise in the coupling production industry in HangZhou City that passed the ISO9002 quality and constitution certification.
The company pursues the business purpose of “reliable quality, the supremacy of reputation, commitment to business and customer satisfaction” and welcomes customers at home and abroad to choose our products.
At the same time, the company has established long-term cooperative relations with many enterprises and warmly welcomes friends from all walks of life to visit, investigate and negotiate business!
How to use the coupling safely
The coupling is an intermediate connecting part of each motion mechanism, which directly impacts the regular operation of each motion mechanism. Therefore, attention must be paid to:
1. The coupling is not allowed to have more than the specified axis deflection and radial displacement so as not to affect its transmission performance.
2. The bolts of the LINS coupling shall not be loose or damaged.
3. Gear coupling and cross slide coupling shall be lubricated regularly, and lubricating grease shall be added every 2-3 months to avoid severe wear of gear teeth and serious consequences.
4. The tooth width contact length of gear coupling shall not be less than 70%; Its axial displacement shall not be more significant than 5mm
5. The coupling is not allowed to have cracks. If there are cracks, it needs to be replaced (they can be knocked with a small hammer and judged according to the sound).
6. The keys of LINS coupling shall be closely matched and shall not be loosened.
7. The tooth thickness of the gear coupling is worn. When the lifting mechanism exceeds 15% of the original tooth thickness, the operating mechanism exceeds 25%, and the broken tooth is also scrapped.
8. If the elastic ring of the pin coupling and the sealing ring of the gear coupling is damaged or aged, they should be replaced in time.
Certifications
Packaging & Shipping
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Materials Used in Manufacturing Gear Couplings
Gear couplings are designed to transmit torque between shafts while accommodating misalignment. To ensure the durability and reliability of gear couplings, manufacturers use a variety of materials, each with its specific properties. Commonly used materials in manufacturing gear couplings include:
- Steel: Steel is the most widely used material for gear couplings. It offers excellent strength, durability, and resistance to wear and fatigue. Steel gear couplings are suitable for a wide range of applications, including heavy-duty industrial machinery.
- Stainless Steel: Stainless steel is chosen for gear couplings that require resistance to corrosion and high-temperature environments. Stainless steel couplings are commonly used in food processing, pharmaceutical, and chemical industries.
- Alloy Steel: Alloy steel is utilized to enhance specific properties, such as increased strength and improved performance under high loads and extreme conditions. Alloy steel gear couplings are ideal for demanding applications in heavy industries.
- Cast Iron: Cast iron is known for its excellent machinability and good resistance to wear. Cast iron gear couplings are suitable for low to moderate torque applications and can be cost-effective in certain scenarios.
- Non-Metallic Materials: In some cases, non-metallic materials like nylon or urethane may be used for specific gear coupling applications, especially in situations where electrical isolation or chemical resistance is required.
The choice of material depends on the application’s demands, including the torque, speed, environmental conditions, and budget considerations. Gear coupling manufacturers carefully select materials that will provide optimal performance and longevity while meeting the specific requirements of the intended application.
editor by CX 2024-02-08
China factory Flexible Flex Fluid Chain Jaw Flange Gear Rigid Spacer Pin HRC Mh Nm Universal Fenaflex Oldham Spline Clamp Tyre Grid Hydraulic Servo Motor Shaft Coupling gear coupling
Product Description
Flexible flex Fluid Chain Jaw flange Gear Rigid Spacer PIN HRC MH NM universal Fenaflex Oldham spline clamp tyre grid hydraulic servo motor shaft Coupling
Product Description
The function of Shaft coupling:
1. Shafts for connecting separately manufactured units such as motors and generators.
2. If any axis is misaligned.
3. Provides mechanical flexibility.
4. Absorb the transmission of impact load.
5. Prevent overload
We can provide the following couplings.
| Rigid coupling | Flange coupling | Oldham coupling |
| Sleeve or muff coupling | Gear coupling | Bellow coupling |
| Split muff coupling | Flexible coupling | Fluid coupling |
| Clamp or split-muff or compression coupling | Universal coupling | Variable speed coupling |
| Bushed pin-type coupling | Diaphragm coupling | Constant speed coupling |
Company Profile
We are an industrial company specializing in the production of couplings. It has 3 branches: steel casting, forging, and heat treatment. Main products: cross shaft universal coupling, drum gear coupling, non-metallic elastic element coupling, rigid coupling, etc.
The company mainly produces the industry standard JB3241-91 swap JB5513-91 swc. JB3242-93 swz series universal coupling with spider type. It can also design and produce various non-standard universal couplings, other couplings, and mechanical products for users according to special requirements. Currently, the products are mainly sold to major steel companies at home and abroad, the metallurgical steel rolling industry, and leading engine manufacturers, with an annual production capacity of more than 7000 sets.
The company’s quality policy is “quality for survival, variety for development.” In August 2000, the national quality system certification authority audited that its quality assurance system met the requirements of GB/T19002-1994 IDT ISO9002:1994 and obtained the quality system certification certificate with the registration number 0900B5711. It is the first enterprise in the coupling production industry in HangZhou City that passed the ISO9002 quality and constitution certification.
The company pursues the business purpose of “reliable quality, the supremacy of reputation, commitment to business and customer satisfaction” and welcomes customers at home and abroad to choose our products.
At the same time, the company has established long-term cooperative relations with many enterprises and warmly welcomes friends from all walks of life to visit, investigate and negotiate business!
How to use the coupling safely
The coupling is an intermediate connecting part of each motion mechanism, which directly impacts the regular operation of each motion mechanism. Therefore, attention must be paid to:
1. The coupling is not allowed to have more than the specified axis deflection and radial displacement so as not to affect its transmission performance.
2. The bolts of the LINS coupling shall not be loose or damaged.
3. Gear coupling and cross slide coupling shall be lubricated regularly, and lubricating grease shall be added every 2-3 months to avoid severe wear of gear teeth and serious consequences.
4. The tooth width contact length of gear coupling shall not be less than 70%; Its axial displacement shall not be more significant than 5mm
5. The coupling is not allowed to have cracks. If there are cracks, it needs to be replaced (they can be knocked with a small hammer and judged according to the sound).
6. The keys of LINS coupling shall be closely matched and shall not be loosened.
7. The tooth thickness of the gear coupling is worn. When the lifting mechanism exceeds 15% of the original tooth thickness, the operating mechanism exceeds 25%, and the broken tooth is also scrapped.
8. If the elastic ring of the pin coupling and the sealing ring of the gear coupling is damaged or aged, they should be replaced in time.
Certifications
Packaging & Shipping
How Does a Gear Coupling Protect Connected Equipment from Shock Loads and Vibrations?
Gear couplings are designed to provide excellent protection to connected equipment from shock loads and vibrations, making them ideal for use in demanding and heavy-duty applications. The design and features of gear couplings that contribute to this protection include:
- Flexible and Rigid Elements: Gear couplings consist of two hubs with external gears that mesh together. Between these two hubs, there is a center sleeve with internal gear teeth. The center sleeve acts as a flexible element, while the outer hubs act as rigid elements. This combination allows the gear coupling to transmit torque while absorbing and dampening shock loads and vibrations.
- Misalignment Compensation: Gear couplings can accommodate angular, parallel, and axial misalignment between shafts. When the connected equipment experiences misalignment due to dynamic forces or shock loads, the gear coupling can flex and adjust to these changes, preventing excessive stress on the shafts and equipment.
- High Torsional Stiffness: Gear couplings offer high torsional stiffness, meaning they have minimal angular deflection under load. This stiffness helps maintain precise alignment and reduces the likelihood of damage to the connected equipment caused by misalignment-induced vibrations.
- Load Distribution: The toothed gear design of gear couplings ensures a large surface area of contact between the gears. This spreads the torque evenly across the gear teeth, resulting in a uniform distribution of load and reducing the concentration of stress on specific areas.
- Damping Characteristics: The flexible center sleeve in the gear coupling acts as a damping element that absorbs and dissipates vibrations, further protecting the connected equipment from harmful oscillations.
- High-Speed Balancing: Gear couplings are precisely balanced during manufacturing to minimize vibrations and ensure smooth operation even at high speeds. Proper balancing helps prevent resonances and reduces the impact of shock loads on the connected equipment.
By effectively absorbing and dampening shock loads and vibrations, gear couplings extend the life of the connected equipment and surrounding components, reduce maintenance requirements, and contribute to a more reliable and efficient mechanical system. However, it is essential to select the appropriate size and type of gear coupling based on the specific application and operating conditions to ensure optimal protection and performance.
editor by CX 2023-12-01
China wholesaler Flexible Flex Fluid Chain Jaw Flange Gear Rigid Spacer Pin HRC Mh Nm Universal Fenaflex Oldham Spline Clamp Tyre Grid Hydraulic Servo Motor Shaft Coupling gear coupling
Product Description
Flexible flex Fluid Chain Jaw flange Gear Rigid Spacer PIN HRC MH NM universal Fenaflex Oldham spline clamp tyre grid hydraulic servo motor shaft Coupling
Product Description
The function of Shaft coupling:
1. Shafts for connecting separately manufactured units such as motors and generators.
2. If any axis is misaligned.
3. Provides mechanical flexibility.
4. Absorb the transmission of impact load.
5. Prevent overload
We can provide the following couplings.
| Rigid coupling | Flange coupling | Oldham coupling |
| Sleeve or muff coupling | Gear coupling | Bellow coupling |
| Split muff coupling | Flexible coupling | Fluid coupling |
| Clamp or split-muff or compression coupling | Universal coupling | Variable speed coupling |
| Bushed pin-type coupling | Diaphragm coupling | Constant speed coupling |
Company Profile
We are an industrial company specializing in the production of couplings. It has 3 branches: steel casting, forging, and heat treatment. Main products: cross shaft universal coupling, drum gear coupling, non-metallic elastic element coupling, rigid coupling, etc.
The company mainly produces the industry standard JB3241-91 swap JB5513-91 swc. JB3242-93 swz series universal coupling with spider type. It can also design and produce various non-standard universal couplings, other couplings, and mechanical products for users according to special requirements. Currently, the products are mainly sold to major steel companies at home and abroad, the metallurgical steel rolling industry, and leading engine manufacturers, with an annual production capacity of more than 7000 sets.
The company’s quality policy is “quality for survival, variety for development.” In August 2000, the national quality system certification authority audited that its quality assurance system met the requirements of GB/T19002-1994 IDT ISO9002:1994 and obtained the quality system certification certificate with the registration number 0900B5711. It is the first enterprise in the coupling production industry in HangZhou City that passed the ISO9002 quality and constitution certification.
The company pursues the business purpose of “reliable quality, the supremacy of reputation, commitment to business and customer satisfaction” and welcomes customers at home and abroad to choose our products.
At the same time, the company has established long-term cooperative relations with many enterprises and warmly welcomes friends from all walks of life to visit, investigate and negotiate business!
How to use the coupling safely
The coupling is an intermediate connecting part of each motion mechanism, which directly impacts the regular operation of each motion mechanism. Therefore, attention must be paid to:
1. The coupling is not allowed to have more than the specified axis deflection and radial displacement so as not to affect its transmission performance.
2. The bolts of the LINS coupling shall not be loose or damaged.
3. Gear coupling and cross slide coupling shall be lubricated regularly, and lubricating grease shall be added every 2-3 months to avoid severe wear of gear teeth and serious consequences.
4. The tooth width contact length of gear coupling shall not be less than 70%; Its axial displacement shall not be more significant than 5mm
5. The coupling is not allowed to have cracks. If there are cracks, it needs to be replaced (they can be knocked with a small hammer and judged according to the sound).
6. The keys of LINS coupling shall be closely matched and shall not be loosened.
7. The tooth thickness of the gear coupling is worn. When the lifting mechanism exceeds 15% of the original tooth thickness, the operating mechanism exceeds 25%, and the broken tooth is also scrapped.
8. If the elastic ring of the pin coupling and the sealing ring of the gear coupling is damaged or aged, they should be replaced in time.
Certifications
Packaging & Shipping
Are There Any Safety Considerations When Using Gear Couplings in Rotating Machinery?
Yes, there are several safety considerations to keep in mind when using gear couplings in rotating machinery:
- Guarding: It is essential to provide adequate guarding around gear couplings and other rotating parts to prevent accidental contact with moving components. Proper guarding helps protect personnel from potential entanglement, pinch points, or other hazards.
- Maintenance and Inspection: Regular maintenance and inspection of gear couplings are critical to ensure their safe and reliable operation. This includes checking for signs of wear, lubrication levels, and any abnormalities in the coupling’s performance.
- Lubrication: Proper lubrication of the gear coupling is essential to reduce friction, wear, and heat generation. Follow the manufacturer’s guidelines for lubrication intervals and use the recommended lubricant type.
- Temperature Monitoring: In high-speed or high-temperature applications, it is advisable to monitor the temperature of the gear coupling during operation. Excessive heat can indicate issues with lubrication or alignment that need immediate attention.
- Alignment: Ensure proper alignment of the connected shafts and gear coupling during installation. Misalignment can lead to increased wear, vibration, and premature failure of the coupling.
- Torque and Speed Limitations: Adhere to the specified torque and speed limitations provided by the gear coupling manufacturer. Operating the coupling beyond its rated capacity can result in failures and safety hazards.
- Emergency Shutdown: Machinery equipped with gear couplings should have an accessible and effective emergency shutdown mechanism to quickly stop the equipment in case of emergencies.
- Training: Provide proper training to personnel who work with or around machinery equipped with gear couplings. Training should cover safety protocols, coupling maintenance procedures, and the potential hazards associated with the equipment.
- Replace Damaged Couplings: If a gear coupling shows signs of damage, excessive wear, or malfunction, it should be replaced promptly to prevent potential accidents or equipment breakdowns.
Following these safety considerations can help ensure the safe and efficient operation of rotating machinery equipped with gear couplings. Regular maintenance, adherence to safety guidelines, and proper training contribute to a safer working environment and prolong the service life of gear couplings and the connected equipment.
editor by CX 2023-09-30
China Servo Motor High Torque Clamping Type Single Disk Flexible Couplings coupling define
Item Description
| Product No. | φD | L | W | L1 | M | Tighten the strength(N.m) |
| SG7-8-C19- | 19.5 | 20 | one.two | 9.4 | M2.5 | 1 |
| SG7-8-C26- | 26 | 25.5 | two.5 | 11.5 | M3 | 1.5 |
| SG7-8-C34- | 34 | 32.3 | three.3 | 14.five | M4 | 1.five |
| SG7-8-C39- | 39 | 34.one | four.1 | 15 | M4 | 2.5 |
| SG7-8-C44- | 44 | 34.5 | 4.five | 15 | M4 | two.five |
| SG7-8-C50- | 50 | 40.5 | four.5 | eighteen | M5 | seven |
| SG7-8-C56- | 56 | 45 | 5 | 20 | M5 | 7 |
| SG7-8-C68- | 68 | 54 | 6 | 24 | M6 | 12 |
| SG7-8-C82- | eighty two | 68 | 8 | thirty | M8 | 16 |
| SG7-8-C94- | 94 | 68 | eight | thirty | M8 | 28 |
| SG7-8-C104- | 104 | 70 | 10 | thirty | M8 | 28 |
| Item No. | Rated torque | Highest Torque | Max Velocity | Inertia Moment | N.m rad | RRO | Tilting Tolerance | End-perform | Weight:(g) |
| SG7-8-C19- | 1N.m | 2N.m | 10000prm | .65×10-6kg.m² | 200N.m/rad | .04mm | 1c | ±0.2mm | 12 |
| SG7-8-C26- | 1.4N.m | 2.8N.m | 10000prm | one.8×10-6kg.m² | 690N.m/rad | .04mm | 1c | ±0.2mm | 31 |
| SG7-8-C34- | two.8N.m | five.6N.m | 10000prm | 7.2×10-6kg.m² | 1650N.m/rad | .04mm | 1c | ±0.2mm | 64 |
| SG7-8-C39- | 5.8N.m | eleven.6N.m | 10000prm | one.8×10-5kg.m² | 2500N.m/rad | .04mm | 1c | ±0.2mm | 97 |
| SG7-8-C44- | eight.7N.m | 17.4N.m | 10000prm | two.5×10-5kg.m² | 2900N.m/rad | .04mm | 1c | ±0.2mm | 113 |
| SG7-8-C50- | 15N.m | 30N.m | 10000prm | eight.2×10-5kg.m² | 6700N.m/rad | .04mm | 1c | ±0.2mm | 195 |
| SG7-8-C56- | 25N.m | 50N.m | 10000prm | 1×10-4kg.m² | 8400N.m/rad | .04mm | 1c | ±0.2mm | 263 |
| SG7-8-C68- | 55N.m | 110N.m | 10000prm | 1.9×10-4kg.m² | 11500N.m/rad | .04mm | 1c | ±0.2mm | 445 |
| SG7-8-C82- | 80N.m | 160N.m | 10000prm | 7×10-4kg.m² | 14550N.m/rad | .04mm | 1c | ±0.2mm | 892 |
| SG7-8-C94- | 185N.m | 370N.m | 10000prm | 1.23×10-3kg.m² | 16900N.m/rad | .04mm | 1c | ±0.2mm | 950 |
| SG7-8-C104- | 255N.m | 510N.m | 10000prm | one.86×10-3kg.m² | 25100N.m/rad | .04mm | 1c | ±0.2mm | 1190 |
|
US $12-32 / Piece | |
1 Piece (Min. Order) |
###
| Standard Or Nonstandard: | Nonstandard |
|---|---|
| Shaft Hole: | Customized |
| Torque: | 2-250n.M |
| Bore Diameter: | Customized |
| Speed: | 10000r/M |
| Structure: | Flexible |
###
| Item No. | φD | L | W | L1 | M | Tighten the strength(N.m) |
| SG7-8-C19- | 19.5 | 20 | 1.2 | 9.4 | M2.5 | 1 |
| SG7-8-C26- | 26 | 25.5 | 2.5 | 11.5 | M3 | 1.5 |
| SG7-8-C34- | 34 | 32.3 | 3.3 | 14.5 | M4 | 1.5 |
| SG7-8-C39- | 39 | 34.1 | 4.1 | 15 | M4 | 2.5 |
| SG7-8-C44- | 44 | 34.5 | 4.5 | 15 | M4 | 2.5 |
| SG7-8-C50- | 50 | 40.5 | 4.5 | 18 | M5 | 7 |
| SG7-8-C56- | 56 | 45 | 5 | 20 | M5 | 7 |
| SG7-8-C68- | 68 | 54 | 6 | 24 | M6 | 12 |
| SG7-8-C82- | 82 | 68 | 8 | 30 | M8 | 16 |
| SG7-8-C94- | 94 | 68 | 8 | 30 | M8 | 28 |
| SG7-8-C104- | 104 | 70 | 10 | 30 | M8 | 28 |
###
| Item No. | Rated torque | Maximum Torque | Max Speed | Inertia Moment | N.m rad | RRO | Tilting Tolerance | End-play | Weight:(g) |
| SG7-8-C19- | 1N.m | 2N.m | 10000prm | 0.65×10-6kg.m² | 200N.m/rad | 0.04mm | 1c | ±0.2mm | 12 |
| SG7-8-C26- | 1.4N.m | 2.8N.m | 10000prm | 1.8×10-6kg.m² | 690N.m/rad | 0.04mm | 1c | ±0.2mm | 31 |
| SG7-8-C34- | 2.8N.m | 5.6N.m | 10000prm | 7.2×10-6kg.m² | 1650N.m/rad | 0.04mm | 1c | ±0.2mm | 64 |
| SG7-8-C39- | 5.8N.m | 11.6N.m | 10000prm | 1.8×10-5kg.m² | 2500N.m/rad | 0.04mm | 1c | ±0.2mm | 97 |
| SG7-8-C44- | 8.7N.m | 17.4N.m | 10000prm | 2.5×10-5kg.m² | 2900N.m/rad | 0.04mm | 1c | ±0.2mm | 113 |
| SG7-8-C50- | 15N.m | 30N.m | 10000prm | 8.2×10-5kg.m² | 6700N.m/rad | 0.04mm | 1c | ±0.2mm | 195 |
| SG7-8-C56- | 25N.m | 50N.m | 10000prm | 1×10-4kg.m² | 8400N.m/rad | 0.04mm | 1c | ±0.2mm | 263 |
| SG7-8-C68- | 55N.m | 110N.m | 10000prm | 1.9×10-4kg.m² | 11500N.m/rad | 0.04mm | 1c | ±0.2mm | 445 |
| SG7-8-C82- | 80N.m | 160N.m | 10000prm | 7×10-4kg.m² | 14550N.m/rad | 0.04mm | 1c | ±0.2mm | 892 |
| SG7-8-C94- | 185N.m | 370N.m | 10000prm | 1.23×10-3kg.m² | 16900N.m/rad | 0.04mm | 1c | ±0.2mm | 950 |
| SG7-8-C104- | 255N.m | 510N.m | 10000prm | 1.86×10-3kg.m² | 25100N.m/rad | 0.04mm | 1c | ±0.2mm | 1190 |
|
US $12-32 / Piece | |
1 Piece (Min. Order) |
###
| Standard Or Nonstandard: | Nonstandard |
|---|---|
| Shaft Hole: | Customized |
| Torque: | 2-250n.M |
| Bore Diameter: | Customized |
| Speed: | 10000r/M |
| Structure: | Flexible |
###
| Item No. | φD | L | W | L1 | M | Tighten the strength(N.m) |
| SG7-8-C19- | 19.5 | 20 | 1.2 | 9.4 | M2.5 | 1 |
| SG7-8-C26- | 26 | 25.5 | 2.5 | 11.5 | M3 | 1.5 |
| SG7-8-C34- | 34 | 32.3 | 3.3 | 14.5 | M4 | 1.5 |
| SG7-8-C39- | 39 | 34.1 | 4.1 | 15 | M4 | 2.5 |
| SG7-8-C44- | 44 | 34.5 | 4.5 | 15 | M4 | 2.5 |
| SG7-8-C50- | 50 | 40.5 | 4.5 | 18 | M5 | 7 |
| SG7-8-C56- | 56 | 45 | 5 | 20 | M5 | 7 |
| SG7-8-C68- | 68 | 54 | 6 | 24 | M6 | 12 |
| SG7-8-C82- | 82 | 68 | 8 | 30 | M8 | 16 |
| SG7-8-C94- | 94 | 68 | 8 | 30 | M8 | 28 |
| SG7-8-C104- | 104 | 70 | 10 | 30 | M8 | 28 |
###
| Item No. | Rated torque | Maximum Torque | Max Speed | Inertia Moment | N.m rad | RRO | Tilting Tolerance | End-play | Weight:(g) |
| SG7-8-C19- | 1N.m | 2N.m | 10000prm | 0.65×10-6kg.m² | 200N.m/rad | 0.04mm | 1c | ±0.2mm | 12 |
| SG7-8-C26- | 1.4N.m | 2.8N.m | 10000prm | 1.8×10-6kg.m² | 690N.m/rad | 0.04mm | 1c | ±0.2mm | 31 |
| SG7-8-C34- | 2.8N.m | 5.6N.m | 10000prm | 7.2×10-6kg.m² | 1650N.m/rad | 0.04mm | 1c | ±0.2mm | 64 |
| SG7-8-C39- | 5.8N.m | 11.6N.m | 10000prm | 1.8×10-5kg.m² | 2500N.m/rad | 0.04mm | 1c | ±0.2mm | 97 |
| SG7-8-C44- | 8.7N.m | 17.4N.m | 10000prm | 2.5×10-5kg.m² | 2900N.m/rad | 0.04mm | 1c | ±0.2mm | 113 |
| SG7-8-C50- | 15N.m | 30N.m | 10000prm | 8.2×10-5kg.m² | 6700N.m/rad | 0.04mm | 1c | ±0.2mm | 195 |
| SG7-8-C56- | 25N.m | 50N.m | 10000prm | 1×10-4kg.m² | 8400N.m/rad | 0.04mm | 1c | ±0.2mm | 263 |
| SG7-8-C68- | 55N.m | 110N.m | 10000prm | 1.9×10-4kg.m² | 11500N.m/rad | 0.04mm | 1c | ±0.2mm | 445 |
| SG7-8-C82- | 80N.m | 160N.m | 10000prm | 7×10-4kg.m² | 14550N.m/rad | 0.04mm | 1c | ±0.2mm | 892 |
| SG7-8-C94- | 185N.m | 370N.m | 10000prm | 1.23×10-3kg.m² | 16900N.m/rad | 0.04mm | 1c | ±0.2mm | 950 |
| SG7-8-C104- | 255N.m | 510N.m | 10000prm | 1.86×10-3kg.m² | 25100N.m/rad | 0.04mm | 1c | ±0.2mm | 1190 |
What Is a Coupling?
A coupling is a device that connects two shafts together. It transmits power from one to the other and is used to join rotating equipment. It can also allow for some degree of misalignment and end movement. It is used in mechanical engineering and manufacturing. To learn more about couplings, read this article.
Mechanical connection between two objectsThe present invention relates to a method and assembly for forming a mechanical connection between two objects. The methods of this invention are suitable for connecting both solid and hollow objects. For example, the method can be used to make mechanical connections between two cylinders. This method is particularly useful for connecting two cylinders that are positioned near each other.
Absorbs vibration
A coupling insert is a part of a vehicle’s drivetrain that absorbs vibrations. These inserts are designed to prevent couplings from moving out of phase. However, the coupling inserts themselves can wear out and need to be replaced. Universal joints are an alternative if the coupling is out of phase by more than one degree. In addition, internal bearings in the coupling need to be lubricated and replaced when they begin to show signs of wear.
Another embodiment of the invention includes a flexible coupling 25 that includes rearwardly-extending lugs that extend toward the coupling member 23. These lugs interdigitate with corresponding lugs on the coupling member 23. They are spaced circumferentially. A first elastic member 28 is interposed between lugs 26 and 27, and is adapted to yield in a counterclockwise direction. As a result, it absorbs torsional vibrations.
Blocks heat transfer
Thermal coupling occurs when a solid block is thermally coupled to the air or fluid passing through it. The amount of heat transferred through a solid block depends on the heat transfer coefficients of the materials. This paper presents a numerical model to understand how heat transfers through different block materials. This work also describes the thermal resistance network for a one-dimensional block.
In some cases, thermal coupling increases the heat transfer mechanism. As illustrated in FIG. 1D, a heatpipe coupler 112 couples two heatpipes 110-1 and 110-2. This configuration allows the pipes to be coupled to the heat source and to the condenser. In addition, the heat pipe couplers may have bellows at the ends to help facilitate linear motion.
Thermal coupling is achieved by ensuring that at least one block is made of a material with a lower thermal expansion coefficient than the annulus. Ideally, the block’s mean thermal expansion coefficient is at least twenty percent lower than the annulus’s mean thermal expansion coefficient. This ensures that the thermal coupling between the two parts is as efficient as possible.
Another type of thermal coupling is achieved by using flexible elements. These are often washers or springs. These components allow the blocks to maintain physical contact with the post 55, which means that the heat transfer is more efficient even at higher temperatures. The flexibility of these elements also makes it possible to choose an element that will not impede assembly.
Protects rotating equipment
A reliable, long-lasting coupling system can reduce the risk of damage to rotating equipment. Designed to protect against torque overload and wear, Voith torque-limiting couplings provide outstanding safety and reliability. As a result, they can deliver maximum performance and minimize equipment downtime. In addition to their long-term benefits, these solutions are ideal for applications where safety and reliability are of paramount importance.
A good coupling provides many advantages, including the ability to transmit power, compensate for axial movement, and absorb shock. It is essential to choose the proper coupling for your application based on the basic conditions of your rotating equipment. For example, if you have two shafts with parallel rotation axes, you should choose a parallel coupling. Otherwise, you should use an angular coupling.
Torque-limiting couplings can also provide protection for rotating equipment by disengaging at a specific torque level. This protects the drive shaft from undergoing catastrophic failure. Torque limiters are particularly helpful for high-value equipment. By preventing catastrophic failure, you can avoid expensive repairs and minimize equipment downtime.
Coupling guards are easy to install and provide effective protection for rotating equipment. These covers are made of sheet metal bent to fit over the shaft. They are durable and easy to remove when necessary. This type of guard can prevent employees from catching their hands, tools, or loose clothing on motor coupling components.
editor by czh 2023-01-06
high High Quality Price Ratio quality Low Speed High Torque Cycloidal Pin Wheel Gear factory sell PLANETARY speed reducer with servo motor supplier
Our item range includes all sorts of helical equipment, spur equipment, bevel gear, gear rack, worm equipment, sprockets,chains, bearings, pto shaft, agricultural gearboxes.
Overview
Rapid Specifics
- Relevant Industries:
-
Manufacturing Plant
- Shade:
-
Blue
- Application:
-
Power Transmission
- Ratio:
-
11-1003
- Content:
-
Cast Iron
- Mounting Place:
-
Horizontal (foot Mounted)
- Certificate:
-
ISO9001
- Output Kind:
-
Sound Shaft Hollow Shaft
- Packing:
-
PLYWOOD
- Guarantee:
-
one Year
- Input Sort:
-
Shaft Enter
Packaging & Shipping and delivery
-
Guide Time
: -
Quantity(Baggage) 1 – 1 2 – 5 >5 Est. Time(days) seven ten To be negotiated
Online Customization
Goods Description
What is cycloid equipment reducer：
Cycloid gear reducer is a new transmission gadget which adopts cycloid equipment meshing with planetary transmission theory. The complete transmission unit of cycloid gear reducer can be divided into three parts: input part, deceleration portion and output component.
Working principle：
When the enter shaft with eccentric sleeve rotation for a 7 days, since of the attribute of the cycloid gear tooth profile curve and its limited by needle on the gear enamel, the movement of the cycloid gear becoming both revolution and rotation of the airplane movement, switch on the input shaft is 7 days, eccentric sleeve also switch the week, cycloidal wheel turned a equipment reduction is obtained in the opposite direction, and then with the support of W output system, the cycloid gear rotates at lower pace movement by way of the pin shaft, handed to the output shaft, reduced output speed can be reached.
Information Images
Item Paramenters
|
Two-stage |
||||||||||||||||||
|
product |
X42 B20 |
X53 B31 |
X63 B41 |
X74 |
X85 B53 |
X95 |
X106 B63 |
X117 B74 |
X128 B85 |
|||||||||
|
speed |
1500RPM |
|||||||||||||||||
|
power |
.seventy five .fifty five |
2.2 1.5 |
two.2 |
four three |
7.five 5.five |
7.five |
– |
– |
– |
|||||||||
Business
OUR Company
We are a maker in ZJ Province, China. Our organization owns the capability of manufacturing, processing, designing and R&D. We welcome your pay a visit to.
We manage the products of power transmission, our lines largely go over series products in pace reducers, gearboxes , associated electricial motors and other energy transmission components. Based on the flexible functions, our items can be used in numerous fields: equipment of waste drinking water treatment method, dredgers, chemical sector, cranes, metal working mills, conveyors, paper market, cement business, cableways and so on.With the superb quality and realistic cost , our products enjoy a very good reputation from consumers and the peers all above the planet.
Our rates are usually aggressive. If the consumer can area a big get, we absolutely will enable discount.
Certifications
Packing & Supply
FAQ
Q1: Are you a investing business or a manufacturer ?
A: We are a company in ZJ Province, China. Our company owns
the capacity of production, processing, creating and R&D. We welcome your pay a visit to.
Q2: How we decide on versions and requirements?
A: In accordance to the specific particulars of the requires from the part of enquiry,
we will advocate the products’ versions upon synthesizing the variables of
field of items usage, electricity, torque arm and ratio…
Q3: How is your cost? Can you provide any price reduction?
A: Our charges are often competitive. If the customer can area a huge order,
we certainly will enable discount.
Q4: How prolonged need to I wait around for the comments soon after I deliver the enquiry?
A: We will reply as shortly as attainable, 12 hrs at most.
Q5: What is your product warranty interval?
A: We have the certifications of ISO9001,CE, SGS.
Q6: What industries are your gearboxes getting employed?
A: Our gearboxes are extensively utilized to metallurgical products, mining
tools, automation gear, foodstuff machinery, packaging products,
tobacco equipment and so on.