Cycle machine suitable for tire coupling

Tyre couplingThe torque is transmitted through the allowable range of the rubber adhesive strength and the tear strength of the cord fabric, without the intervention of any rigid components, and there is no rigid effect on each other.From this point of view, the motor and the circulating pump can absorb shocks separately, and their mechanical properties have a protective effect. Therefore, the vibration absorption effect and noise are much smaller than other coupling devices.This device is especially suitable for use in severely humid conditions.In other words, it is especially suitable for dyeing environment.At the same time, it can still be used normally even when the two-axis angle error is large.Therefore, the choice of tire coupling in the circulatory system of the dyeing machine is superior to couplings such as elastic pin couplings and nylon pin couplings.Since this device has no official product, its radial dimension is large, and the flywheel torque is also large, coupled with the influence of the traditional coupling method, there are certain difficulties in popularization.In order to ensure the normal operation of the equipment introduced by our factory and save maintenance investment, we have fully realized its superiority and collected technical data from multiple parties.In the joint design with the rubber factory, while considering its load-bearing capacity, try to limit the radial size to reduce the flywheel moment.At the same time, combined with existing domestic equipment, for example, the diameter of the tire rim on domestic cranes and other equipment is
Tool steel has good strength, toughness, hardness, wear resistance and tempering stability.Mainly used to manufacture various cutting tools, forming tools and measuring tools.

The tire coupling is a highly elastic coupling with good shock absorption and excellent inter-axis offset compensation performance. The working temperature is -20~80 degrees Celsius, and the transmission torque is 10~20000N.M. It is suitable for Damp, dusty, shock, vibration, changeable forward and reverse, and frequent starting working conditions. It is easy to disassemble and assemble, does not need lubrication, and is durable and reliable.
　　Non-standard couplings are made according to special needs. When overloaded, the clamping flaps of the half couplings will work, and no malignant accidents will occur. Its structure is marked as M, and the standard half coupling structure is K type. Can no longer mark in the presentation.