Hot products
breaking news
Structural characteristics of drive shaft accessories
The drive shaft accessory is a high-speed, low-supported rotating body, and its dynamic balance is very important.Generally, the drive shaft must undergo a dynamic balance test before leaving the factory and adjusted on a balance machine.Therefore, a set of transmission shafts are matched with the factory...
How to use and maintain the drive shaft
Use and maintenance of the drive shaft: In order to ensure the normal operation of the drive shaft and extend its service life, attention should be paid to the following in use: 1. It is strictly forbidden for the car to start with a high gear. 2. It is strictly forbidden to lift the clutch pedal suddenly. 3. It is strictly forbidden to overload and speed vehicles. ...
Variety classification and function analysis of couplings
General mechanical parts, the shaft of the machine is linked by it, so that the shaft can rotate naturally.If it is a high-speed machine, the coupling also needs to buffer, reduce pressure and improve the dynamic performance of the shafting.The coupling is connected by the driving shaft and the driven shaft, one...
Select the requirements of the reducer coupling
1. According to the size of the transferred load, the speed of the shaft, due to manufacturing, installation, load deformation and temperature changes, after installation and adjustment, it is difficult to maintain strict and accurate alignment of the two shafts, and there is a certain degree of x and Y directions. Displacement and skew angle.On the move...
Coupling manufacturer detects concentric rotation
Coupling correction of concentricity is an important part of the maintenance of rotating equipment. If the correction method is incorrect or the corrected result is inaccurate, it will cause the vibration value of the rotating equipment to exceed the standard, which seriously threatens the normal operation of the rotating equipment, especially the high speed. Equipment, yes...
Summary of coupling selection skills
Coupling is a mechanical component that is mainly used to connect two rotating shafts in mechanical transmission to transmit torque or rotation angle; it can also be used for equipment protection of *devices; shafts cannot be separated during movement, only When the equipment stops working...
Industry Information
Technical Information
