Drum-shaped gear couplings may have excessive center deviation and large relative displacement of the tooth surface during operation. The solution to this situation is to adjust the center irregularly to ensure that it will not occur. The phenomenon of excessive center deviation.like
Drum gear couplingIn the process of work and operation, there may be excessive center deviation and large relative displacement of the tooth surface. The solution to this situation is to adjust the center from time to time to ensure that there will be no excessive center deviation.If the product is faulty due to poor material and low hardness of the straight face, it should be noted that the HRC of the tooth surface hardness after treatment is about 50-60 in the selection of materials.
Drum-type gear couplings will experience insufficient lubrication or dry grinding after a long time of operation. The amount of oil should be checked in time to ensure that the lubricating oil pipes are aligned well and adequately but not too much.In the selection of lubricating oil, filter oil should be selected so that the maximum particle size of the oil containing impurities is less than 25um.
In the selection of drum-shaped gear couplings, it is necessary to select drum-shaped gears with good performance, install various drum-shaped gear couplings as required, and check the radial clearance of the inner and outer teeth.And frequently change the lubricating oil, pay attention to check all the details, to ensure that the coupling can work normally for a long time.
