Material Managing Electrical power UNIT 1
Standard Description
This electrical power unit is designed for your fork lift field, consisting of really productive gear pump, DC motor, guide raise and reduce valve, tank, ect. The up and down motion are controlled from the lever of the guide release valve, and that is equipped with an electrical switch to activate the motor. The lowing velocity is managed by the pressure compensated movement control valve.
Particular Notes
one. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean all the hydraulic elements concerned just before set up of the power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which need to also be clean and totally free of impurities, N46 hydraulic oil is advised .
four. Oil transforming is needed following the initial 100 operation hours, afterwards as soon as just about every 3000 hrs.
five. The energy unit shown is intended to be mounted horizontally.

Materials Managing Power UNIT 2
General Description
This energy unit capabilities electrical power up gravity down circuit. Activate the start out solenoid to start out the motor to lift the machine. The lowing movement is activated from the solenoid valve with all the lowering pace controlled through the strain compensated movement handle valve. Products of this series could be widely used in the marketplace of logistic units such as fork lift, mini lift table, and so on.
Exclusive Notes
1. The duty of this electrical power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean all of the hydraulic components concerned in advance of mounting the power unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst,which ought to also be clean and absolutely free of impurities, N46 hydraulic oil is suggested .
four. Oil changing is needed just after the first 100 operation hrs,afterwards once just about every 3000 hours.
5. The power unit needs to be mounted horizontally.