Tag Archives: 3 phase motor

China 3 Phase Synchronous Motor

The procedure of a standard a few-period synchronous motor can be summarized as follows:

  • 3-phase AC voltage is used to the stator windings and a rotating magnetic discipline is created.
  • DC voltage is used to the rotor winding and a 2nd magnetic area is developed.
  • The rotor then functions like a magnet and is captivated by the rotating stator discipline.
  • This attraction exerts a torque on the rotor and triggers it to rotate at the synchronous velocity of the rotating stator field.
  • The rotor does not demand the magnetic induction from the stator field for its excitation. As a consequence, the motor has 0 slip in contrast to the induction motor, which demands slip in order to make torque.

Synchronous motors are not self-beginning and therefore demand a method of bringing the rotor up to in close proximity to synchro nous pace prior to the rotor DC energy is used. Synchronous motors normally commence as a standard squirrel cage induction motor by way of use of particular rotor amortisseur windings. Also, there are 2 simple techniques of delivering excitation present to the rotor. A single strategy is to use an external DC supply with present provided to the windings by way of slip rings. The other approach is to have the exciter mounted on the common shaft of the motor. This arrangement does not call for the use of slip rings and brushes.

An electrical system’s lagging can be corrected by overexciting the rotor of a synchronous motor operating in the same method. This will produce a leading energy factor, canceling out the lagging energy aspect of the inductive masses. An underexcited DC field will generate a lagging electricity element and for this explanation is seldom used. When the subject is usually thrilled, the synchronous motor will run at a unity electricity factor. Three-stage synchronous motors can be utilized for power element correction whilst at the same time carrying out a significant perform, this kind of as running a compressor. If mechanical energy output is not needed, even so, or can be presented in other cost-powerful methods, the synchronous device continues to be valuable as a “nonmotor” means of con trolling energy element. It does the same task as a financial institution of static capacitors. This kind of a equipment is called a synchronous condenser or capacitor.

How to Assemble a Planetary Motor

A Planetary Motor uses multiple planetary surfaces to produce torque and rotational speed. The planetary system allows for a wide range of gear reductions. Planetary systems are particularly effective in applications where higher torques and torque density are needed. As such, they are a popular choice for electric vehicles and other applications where high-speed mobility is required. Nevertheless, there are many benefits associated with using a planetary motor. Read on to learn more about these motors.

VPLite

If you’re looking to replace the original VP, the VPLite has a similar output shaft as the original. This means that you can mix and match your original gear sets, including the input and output shafts. You can even mix metal inputs with plastic outputs. Moreover, if you decide to replace the gearbox, you can easily disassemble the entire unit and replace it with a new 1 without losing any output torque.
Compared to a planetary motor, a spur gear motor uses fewer gears and is therefore cheaper to produce. However, the latter isn’t suitable for high-torque applications. The torque produced by a planetary gearmotor is evenly distributed, which makes it ideal for applications that require higher torque. However, you may have to compromise on the torque output if you’re looking for a lightweight option.
The VersaPlanetary Lite gearbox replaces the aluminum ring gear with a 30% glass-filled nylon gear. This gearbox is available in 2 sizes, which means you can mix and match parts to get a better gear ratio. The VPLite gearbox also has a female 5mm hex output shaft. You can mix and match different gearboxes and planetary gearboxes for maximum efficiency.
Motor

VersaPlanetary

The VersaPlanetary is a highly versatile planetary motor that can be mounted in a variety of ways. Its unique design includes a removable shaft coupler system that makes it simple to swap out the motor with another. This planetary motor mounts in any position where a CIM motor mounts. Here’s how to assemble the motor. First, remove the hex output shaft from the VersaPlanetary output stage. Its single ring clip holds it in place. You can use a drill press to drill a hole into the output shaft.
After mounting the gearbox, you can then mount the motor. The mounting hardware included with the VersaPlanetary Planetary Motor comes with 4 10-32 threaded holes on a 2-inch bolt circle. You can use these holes to mount your VersaPlanetary on a CIM motor or a CIM-compatible motor. Once assembled, the VersaPlanetary gearbox has 72 different gear ratios.
The VersaPlanetary gearbox is interchangeable with regular planetary gearboxes. However, it does require additional parts. You can purchase a gearbox without the motor but you’ll need a pinion. The pinion attaches to the shaft of the motor. The gearbox is very sturdy and durable, so you won’t have to worry about it breaking or wearing out.

Self-centering planetary gears

A planetary motor is a simple mechanical device that rotates around a axis, with the planets moving around the shaft in a radial direction. The planets are positioned so that they mesh with both the sun gear and the output gears. The carrier 48 is flexibly connected to the drive shaft and can move depending on the forces exerted by the planet gears. In this way, the planets can always be in the optimal mesh with the output gears and sun gear.
The first step in developing a planetary gear motor is to identify the number of teeth in each planet. The number of teeth should be an integer. The tooth diameters of the planets should mesh with each other and the ring. Typically, the teeth of 1 planet must mesh with each other, but the spacing between them must be equal or greater than the other. This can be achieved by considering the tooth count of each planet, as well as the spacing between planets.
A second step is to align the planet gears with the output gears. In a planetary motor, self-centering planetary gears must be aligned with both input and output gears to provide maximum torque. For this to be possible, the planet gears must be connected with the output shaft and the input shaft. Similarly, the output shaft should also be able to align with the input gear.
Motor

Encoders

A planetary geared motor is a DC motor with a planetary gearbox. The motor can be used to drive heavy loads and has a ratio of 104:1. The shaft speed is 116rpm when it is unloaded. A planetary gearbox has a low backlash and is often used in applications that need high torque. Planetary Motor encoders can help you keep track of your robot’s position or speed.
They are also able to control motor position and speed with precision. Most of them feature high resolution. A 0.18-degree resolution encoder will give you a minimum of 2000 transitions per rotation between outputs A and B. The encoder is built to industrial standards and has a sturdy gearbox to avoid damage. The encoder’s robust design means it will not stall when the motor reaches its maximum speed.
There are many advantages to a planetary motor encoder. A high-quality 1 will not lose its position or speed even if it’s subject to shocks. A good quality planetary motor will also last a long time. Planetary motors are great for resale or for your own project. If you’re considering buying a planetary motor, consider this information. It’ll help you decide if a particular model is right for your needs.

Cost

There are several advantages of planetary motors. One of the biggest is their cost, but they can also be used in many different applications. They can be combined with a variety of gearboxes, and are ideal for various types of robots, laboratory automation, and production applications. Planetary gearboxes are available in many different materials, and plastic planetary gearboxes are an economical alternative. Plastic gearboxes reduce noise at higher speeds, and steel input stage gears are available for high torques. A modified lubrication system can help with difficult operating conditions.
In addition to being more durable, planetary motors are much more efficient. They use fewer gears, which lowers the overall cost of production. Depending on the application, a planetary motor can be used to move a heavy object, but is generally less expensive than its counterpart. It is a better choice for situations where the load is relatively low and the motor is not used frequently. If you need a very high torque output, a planetary motor may be the better option.
Planetary gear units are a good choice for applications requiring high precision, high dynamics, and high torque density. They can be designed and built using TwinCAT and TC Motion Designer, and are delivered as complete motor and gear unit assemblies. In a few simple steps, you can calculate the torque required and compare the costs of different planetary gear units. You can then choose the best model for your application. And because planetary gear units are so efficient, they are a great option for high-end industrial applications.
Motor

Applications

There are several different applications of the planetary motor. One such application is in motion control. Planetary gearboxes have many benefits, including high torque, low backlash, and torsional stiffness. They also have an extremely compact design, and can be used for a variety of applications, from rack and pinion drives to delta robotics. In many cases, they are less expensive to manufacture and use than other types of motors.
Another application for planetary gear units is in rotary tables. These machines require high precision and low backlash for their precise positioning. Planetary gears are also necessary for noise reduction, which is a common feature in rotary tables. High precision planetary gears can make the height adjustment of OP tables a breeze. And because they are extremely durable and require low noise, they are a great choice for this application. In this case, the planetary gear is matched with an AM8000 series servomotor, which gives a wide range of choices.
The planetary gear transmission is also widely used in helicopters, automobiles, and marine applications. It is more advanced than a countershaft drive, and is capable of higher torque to weight ratios. Other advantages include its compact design and reduced noise. A key concern in the development of this type of transmission is to minimize vibration. If the output of a planetary gear transmission system is loud, the vibration caused by this type of drive system may be too loud for comfort.

Finished 3 hp single phase motor winding data Custom made in China – replacement parts – in El Djelfa Algeria Spiral Bevel Gears Supplier with top quality

Finished 3 hp single phase motor winding info Custom made in China - replacement parts - in El Djelfa Algeria Spiral Bevel Gears Supplier with leading high quality

We – EPG Group the greatest worm gearbox, couplings and gears manufacturing unit in China with 5 different branches. For more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

 

Q:What`s the MOQ of your merchandise?

A:1 set,we can also offer with the sample order. and the big-quantity.

Q:How could i know if the item appropriate for my machine?

A:Our sales will speak to with you to make positive the specific dimensions,info and other essential information of your aimed merchandise.We make positive all the items suit for your equipment.

Q:I want to discover a new supplier for goods,can you?

A:Certain,we can supply the entire working day service for your consulting,we goal at becoming your most essential provider.

Q:What`s the payment phrases of the purchase?

A:As your need,we can take a number of sorts of payment conditions.

/ The use of unique equipment manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating item use and compatibility. Our organization and the outlined replacement components contained herein are not sponsored, approved, or produced by the OEM. /

Finished 3 hp single stage motor winding data Personalized made in China - substitute areas - in El Djelfa Algeria Spiral Bevel Gears Provider with best good quality

Finished 3 hp one phase motor winding data Custom produced in China - substitution components - in El Djelfa Algeria Spiral Bevel Gears Supplier with prime high quality

Fully 3 phase induction motor yaskawa near me made in China – replacement parts – in Tasikmalaya Indonesia Automatic Ceiling Tile T Grid Machinery Real Factroy in China with top quality

Fully 3 section induction motor yaskawa around me manufactured in China - substitution components - in Tasikmalaya Indonesia Automatic Ceiling Tile T Grid Machinery Genuine Factroy in China with prime top quality

We – EPG Team the most significant worm gearbox, couplings and gears manufacturing facility in China with 5 diverse branches. For more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

KaiGui Equipment is NO.1 and just concentrating on Suspension Ceiling T Bar/T Grid Roll Forming Machinery
Roller and Mould/Die Material and Processing and Warmth therapy we do by our personal
Electric handle Cabinet and PLC by our personal Electric engineer with Exceptional Efficiency
The Most Automatic, Sophisticated and Fast Velocity whilst Steady functionality
Totally Computerized Non-cease Flying Cutting off
Worm Gearbox Reducer Transmission
Stitching Mould and Patented Steel head Clip Lock Continous Mould
Perfect provider and Large standard QC
Hearth-evidence Gap and Custmer’s Symbol on T Bar
Life span QWP (quick weary parts) assistance and Technological innovation update service.

Product size: H*W(MM)38×35 38×24 38×15 32×24 32×15 28×24 28×15 etc. Length: 3600/3660mm
Any dimension and any desire we can do as for every customer’s drawing or sample.

⊙ Primary Parts(A—-F):
A(2 Uncoilers for GI& PPGI) + B(Primary Machine Roll Former) + C(Computerized Punching& Slicing-off System) +D(Electric PLC management Cabinet) + E(2 Hydraulic standions) + F(Run-out Table)
⊙ Main Parameter:
Stations: eighteen-24 Stations
Velocity: twenty–25M/Min(6–7Pcs/Min)
Total Electrical power: 21.2KW(4KW+2.2KW+15KW)
PLC brand: Siemens
Xihu (West Lake) Dis.n-Device interface: Siemens
Installation length: 14.8M
Die/Mould Material: SKD11
Customer’s Logo: Okay
Anti-Fireplace Hole: Okay
Stitching Line: Ok
Metal Head Lock: Ok
Transmission: Worm Gearbox Reducer
Major Hydraulic station with Accumulator for secure and precise efficiency

A: Uncoiler/Decoiler/Coil Opener/Uncooked Material Shelf:
Code: MT-two hundred
Fat: 100kg
Size: 1000*800*1100(mm)
Uncooked Substance Roll :
Internal Diameter: 450-530mm
Outer Diameter: 1200mm
Loading excess weight: 1000kg
Make certain the GI and PPGI
Unoiler in the specific line with
Principal Former Machine

☆ Station/Move/Pinion: eighteen stations
☆ Speed: 20—25M/Min(6–7Pcs/Min)
☆ Device physique: Carbon Steel, Thickness 20mm, Polished, Rust Prevention Paint Defense,Any coloration accessible
☆ Transmission: Motor 4KW, Primary Transmission: Chain Travel, In between Rollers: Worm wheel Gearbox
☆ Stitch: Four Rollers real sew, can also be employed for fake sew.
☆ Facet plate: Thickness 30mm, Polish 6 sides, large precision unexciting
☆ Principal Axis: forty five# steel, tempering heat remedy, mill grinder exact making
☆ Electrical Cabinet: SIENENS PLC programmed, Touch Display screen, Totally Automated controlling program.
☆ Punching Die: Content D11, Hardness HRC fifty eight-sixty, Exact milled, exact producing, simple to detachable parts.
Stitching System
☆ Roller: Materials Cr12 Interior diameter 39mm, Min OD 90mm, HRC fifty five-56, Symmetry in the variety of .05mm

C Automatic Punching and Traveling Cutting-off Technique:
Characteristics:
☆ Punching Die: 24 sets( 2 head locks 22 Major Tee holes)
☆ Anti-Fireplace Gap Die Accessible on Equipment
☆ Chopping: Flying Reducing-Off Contineous wor ept non-cease
☆ Driving Power: 2 Hydraulic stations a single for Punching system vacation and one particular for punching
☆ Accurancy: Height and Width in .1mm In Duration .3mm/Meter
☆ Die Content: 45# steel and Cr12MoV, Warmth treatment Vacuum fifty eight–60HRC
☆ Slicing off Length: 3600 or 3660mm
☆ Gap Distance: 150cm or 6″
☆ Custom made Symbol Punching at very same time on Equipment Fully Computerized

D Electrical PLC manage Cabinet
Functions:
☆ PLC manufacturer: SIEMENS
☆ Xihu (West Lake) Dis.n-Device Interface: SIEMENS
☆ Inverter: Teco ZheJiang brand name
☆ Switch Energy: Delta ZheJiang model
☆ Wire relationship interface: Aviation plug

E Hydraulic stations
Characteristics:
☆ Hydraulic brand name: LYHP
☆ Electromagnetic valve: XIHU (WEST LAKE) DIS. manufacturer
☆ Accumulator: Nitrogen
☆ Major Hydraulic: 15KW
☆ Secondary Hydraulic: 2.2KW
☆ Color: Any coloration accessible

F Run-out Desk
Characteristics:
Dimensions: 3800x750x970mm
Complete: polish
Substance: Stainless Steel 304 the outward surface painted defense, Any colour available
This compenent is wor ept desk. Merchandise will fall on to the desk and slide out effortlessly, so it avoids scratching and easy for packing. And there are waste grooves upgrade to conduct the squander metal odd ends to the barrel.

 

/ The use of original tools manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our organization and the outlined substitute parts contained herein are not sponsored, approved, or created by the OEM. /

Fully 3 stage induction motor yaskawa near me manufactured in China - alternative parts - in Tasikmalaya Indonesia Computerized Ceiling Tile T Grid Machinery Real Factroy in China with best quality

Fully 3 stage induction motor yaskawa in close proximity to me manufactured in China - alternative parts - in Tasikmalaya Indonesia Computerized Ceiling Tile T Grid Machinery Actual Factroy in China with leading top quality

Foot-Mounted vector control of 3 phase induction motor near me made in China – replacement parts – in Santiago Chile Helical-Worm Gear Reducer with Solid Shaft Gear Motor with top quality

Foot-Mounted vector control of 3 period induction motor around me created in China - substitution elements - in Santiago Chile Helical-Worm Gear Reducer with Strong Shaft Equipment Motor with best good quality

We – EPG Team the largest worm gearbox, couplings and gears manufacturing facility in China with 5 various branches. For more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

EWS sequence adopts helical gear – worm equipment pace reducer motor built-in drive to enhance the torque and performance of the speed reducer with wide assortment of rotating pace and excellent universality, it is applicable to varied installation modes and functions secure and reliable overall performance, and lengthy service existence, furthermore, it also complies with the international regular.

Attribute benefit
one.Combination of helical gear and worm, vertical output, compact structure, higher velocity ratio.
2.The concave-convex area of the solution gives the purpose of heat dissipation, and attributes strong vibration absorption, reduced temperature rise, reduced sound. 
3.The merchandise attributes higher push precision, and is specially suitable for the web site with repeated begin, is can be related with varied pace reducers and configuring assorted motor drives, and can be installed at the 90º push procedure website. 

Specification parameter
Installation type :  Foot,flange,little flange,torque arm.
Output kind :      Solid shaft,hollow shaft,hollow shaft with shrink disk,spline hollow shaft.
Enter variety :        Motor,enter shaft and flange
technical parameters :  ratio i=23.8~389,mix of EWS/EWR is up to26688
Efficiency : ratio i=23.8~389,seventy seven%ratio i=73.7~389,sixty two%and blend of EWS/EWR57%.

  

Industrial Application 
Electrical power Plant Equipment 
Metallurgical Industry 
Steel Forming Machinery 
Petrochemical Industry 
Mining Machine 
Hoisting Machinery 
Development Industry 
Environmental Safety Industry 
Cable Industry 
Foodstuff Machinery 

Certificates
Passed ” ISO 9001 Intercontinental Good quality Method Certification”,”Europe CE Certification”, ” Swiss SGS Certificate”,”Large-tech business certificate of ZheJiang metropolis”,”Exceptional functionality management enterprise of ZheJiang metropolis”,and so forth.
FAQ 
one. Q: Can you make as for every custom drawing? 
A: Of course, we provide tailored support for customers. 
2. Q: Are you a factory or ept business? 
A. We are maker in ZheJiang China. 
three. Q: What is your MOQ? 
A: One particular piece. 
four. Q: What is actually your production time? 
A: 7-fifteen wor ept times soon after obtaining payment. 
five. Q: What is your payment phrases? 
A: T/T, 30% payment in advance, 70% harmony payment must be paid just before delivery. 
six. Q: What is your package deal? 
A: In wooden box packaging. 

ZheJiang ept Equipment Reducer Co.,Ltd., former a joint enterprise invested by is a ZheJiang EAST PUMP Group and Effectively Business of The us.We are skilled producer of the equipment reducers and focus in the equipment reducers area in China for twenty years. ept has excellent R&D group,prime-ran ept generation and check tools.So we have the powerful electrical power in the creating and manufacturing the expectations variety as well as the customized kind equipment reducer for our consumers.

/ The use of authentic equipment manufacturer’s (OEM) part numbers or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating merchandise use and compatibility. Our organization and the detailed substitute areas contained herein are not sponsored, accredited, or produced by the OEM. /

Foot-Mounted vector control of 3 section induction motor near me made in China - replacement parts - in Santiago Chile Helical-Worm Gear Reducer with Reliable Shaft Equipment Motor with leading quality

Foot-Mounted vector control of 3 phase induction motor around me produced in China - alternative areas - in Santiago Chile Helical-Worm Equipment Reducer with Reliable Shaft Gear Motor with best quality

EPT best made in China – replacement parts – in Chelyabinsk Russian Federation 180W 3 Phase AC Motor with top quality

EPT best made in China - replacement parts - in Chelyabinsk Russian Federation 180W 3 Period AC Motor with best top quality

We – EPG Group the largest gearbox & motors , couplings and gears factory in China with 5 diverse branches. For much more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

MS aluminum ac motor

MS Series Aluminum Housing A few Section Induction Motor adopts the latest design and style and high quality materials and are conform to the IEC standard in operate, physical appearance, output and other needs.

The efficiency of MS motor satisfies EFF2 common in E. U., and can achieve the EFF1 standard if asked for. MS motor has a lot of benefits which includes higher performance, strength saving, low sounds, small vibration, mild bodyweight, modest quantity, reputable procedure, up-to-day physical appearance, practical operation and routine maintenance.

MS motor is died cast into mounding form by aluminum-alloy. The base foot can be detachable. Various mounting varieties are offered for MS motor.

MS motor is suited for typical wor ept atmosphere and machinery without particular necessity, like air-compressor, pump, admirer, health-related apparatus and devices, tiny devices etc.

The use of original products manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our company and the detailed alternative areas contained herein are not sponsored, accepted, or created by the OEM.

EPT best made in China - replacement parts - in Chelyabinsk Russian Federation 180W 3 Stage AC Motor with best high quality

EPT best made in China - replacement parts - in Chelyabinsk Russian Federation 180W 3 Period AC Motor with best quality

High 3 phase motor to single phase motor supplier made in China – replacement parts – in Venezia Italy Quality Gearbox X Series Cycloidal Speed Reducer with top quality

High 3 section motor to one period motor supplier created in China - substitute areas - in Venezia Italy Quality Gearbox X Collection Cycloidal Velocity Reducer with best quality

We – EPG Group the most significant worm gearbox, couplings and gears factory in China with 5 various branches. For much more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

 


Rated Input Power of Cycloidal Reducer for Solitary-phase Motor

Stand no. Transmission Ratio
11 17 23 29 35 forty three 59 71 87
X2
B0		 0.75
.fifty five		 .fifty five 0.37
.25
X3
B1		 two.two
1.five		 1.5
1.one		 1.one
.seventy five		 0.55
X4
B2		 4
3		 2.two
1.5		 1.5
one.1		 1.1
.75		 0.seventy five
X5
B3		 7.5
five.5		 5.5
4		 4
three		 3
two.2		 2.2
one.5		 1.5
X6
B4		 11
7.five		 7.5
five.5		 5.5
four		 four
three		 three
two.2		 2.2
X7 15
11		 11
7.five		 seven.five
five.5		 5.five
4		 4
X8
B5		 18.5
15		 15
eleven		 11
7.five		 7.five
5.5		 5.5
X9
B6		 22
eighteen.5		 18.five
fifteen		 15
eleven		 11

Feature:

Higher speed ratio and large efficiency of one phase transmission, can obtain 1:87 reduction ratio, the effectiveness of far more than 90%, if the use of multi-stage transmission, reduction ratio is bigger.
Compact structure and modest volume owing to the adoption of planetary transmission principle, the enter shaft output shaft in the same axis line, so that its design to obtain the smallest achievable size.
Smooth managing noise low cycloidal needle tooth meshing enamel quantity, overlap coefficient is huge and has the system of parts balance, vibration and sound limit in the bare minimum degree.
The use of reputable, long lifestyle because the primary areas of the high carbon chromium steel material, after quenching treatment method (HRC58 ~ sixty two) to obtain higher toughness, and, component of the transmission speak to making use of rolling friction, so lengthy existence.

Application region

Cycloid equipment reducer uses cycloid tooth meshing, planetary transmission basic principle, so it is usually named planetary cycloid reducer.
Planetary cycloid pin-wheel reducer can be extensively utilised in petroleum, environmental protection, chemical industry, cement, transportation, textile, pharmaceutical, foods, printing, lifting, mining, metallurgy, construction, electrical power generation and other industries, as a driving or decelerating gadget, the machine is divided into horizontal, vertical, biaxial and immediate assembly method.
Its distinctive smooth framework in several cases can change the normal cylindrical gear reducer and worm gear reducer, for that reason, planetary cycloid equipment reducer is extensively utilized in a variety of industries and fields, by the greater part of consumers are generally welcomed.

 

Traits of transportation and packaging

   Short shipping and delivery time period,to guarantee timely supply.
   Tight packing,to make sure the products are not damaged for the duration of transportation.
   Various modes of transportation,to guarantee safe and well timed transportation
    Follow up the total procedure of purchase,to guarantee merchandise shipping to customers.
   Long shelf existence, to make certain client expertise.

FAQ

Q1: Are you a ept organization or a company ?
A: We are a manufacturer in ZheJiang Province, China. Our organization owns the capability of production, processing, creating and R&D. We welcome your visit.

Q2: How we choose versions and technical specs?
A: In accordance to the particular particulars of the calls for from the part of enquiry, we will suggest the products’ designs on synthesizing the factors of field of goods use, energy, torque arm and ratio…

Q3: How is your price tag? Can you offer any discount?
A: Our charges are constantly competitive. If the consumer can place a huge get, we certainly will let discount.

Q4: How prolonged must I wait around for the feedback after I deliver the enquiry?
A: We will reply the enquiries with no any delay, twelve several hours at most.

Q5: What is your merchandise warranty time period?
A: We have the certifications of ISO99001,CE, 

Q6: What industries are your gearboxes becoming utilised?
A: Our gearboxes are widely applied to metallurgical equipment, mining gear, automation equipment, foodstuff equipment, packaging tools, tobacco products and so on.

 

/ The use of first gear manufacturer’s (OEM) part quantities or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our organization and the detailed substitute parts contained herein are not sponsored, accepted, or created by the OEM. /

High 3 stage motor to one stage motor provider created in China - alternative components - in Venezia Italy Top quality Gearbox X Collection Cycloidal Speed Reducer with prime high quality

High 3 period motor to solitary phase motor provider produced in China - alternative components - in Venezia Italy Top quality Gearbox X Collection Cycloidal Pace Reducer with best high quality

3 factory made in China – replacement parts – in Jammu India Phase AC Electric Motor Sewage Pump Motor with top quality

3 manufacturing unit manufactured in China - replacement elements - in Jammu India Stage AC Electric powered Motor Sewage Pump Motor with leading top quality

We – EPG Group the largest gearbox & motors , couplings and gears factory in China with 5 distinct branches. For a lot more information: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Generation Description
Y series large voltage motors are chinese new sequence motor instand the old sort of JS,This series motors are box framework welding
by steel sheet.they are lower in excess weight,excellent functionality,high effectiveness,, This collection motors are open typethey are,utilised in indoor
to push Blowers,Compressor,Pumps,Crushers,Inventory-removings and other common-function equipment.They can provide as the key
movers in electricity plants,steel and so on subject.

Type Y
Electricity 180kw~6000kw
Insulation F / B, H/B
Voltage and frequency three.3kv/6kv/6.6kv 10kv 13.8kv   50 / 60HZ 
Velocity 3000/1500/a thousand/750/600 rpm
Mounitng IMB3/IMV1
Cooling and ventilation IC01 of IEC60034-6.
Winding 100% Copper Wire
Protection class IP23
Vibration  vibration class A, vibration class B is available on request.
Quality assurance  ISO9001
Site conditions  from -15°C t0 +40°C and altitude below 1000 meters

Y sequence large voltage motors are chinese new series motor instand the old kind of JS,This collection motors are box structure welding
by steelsheet.they are lower in weight,very good efficiency,substantial performance,, This sequence motors are open up typethey are,utilized in indoor
to drive BlowersCompressor,Pumps,Crushers,Inventory-removings and other basic-purpose equipment.They can provide as the key
movers in power vegetation steel etc field

Products Application, Value Added Service

PinnxunMotor can provide a complete set of optimal solutions for various Applications,Bring innovation andvalueadded to our
clients, At the same time, we can also formulate special solutions according to the different needed of customer 

Product  Process
 

Pinnxun constantly get excellent faith, responsibility, carefulness and excellence as our management philosophy,committedto supplying
customers with superior high quality merchandise,every phase in processs must be take entire attention.

Qualification certification technique

The key for ‘Pinxing’ lengthy-terms cooperation is to continuously enhance the top quality of is items and provider,By virtue of is
comprehensiveprocess, quality administration technique and rigorous compliance with internationalmainstream requirements.’Pinxing’
has established a good quality administration system that has passed ISO9001-2008 Good quality administration system certification

ISO14001 Environmental management system.
ISO9001-2008 High quality management program
ISO14001 Environmental administration technique
CE European Certification
IECEX Throughout the world Ex Certification for Ex motors
ATEX European Ex Certification for Ex motors
EAC Russia GOST normal Ex certification for Ex motors
CQC China good quality heart strength conservation certification

Globally Advertising & Provider Network 

World-wide Perfect Advertising and marketing support network is a single of Pinxing’s gain. we have 38 branches in china major city,5 branches in
theAbroad ,Our business penetrates more than 60 international locations and regions including South The united states, North The usa,Europe, Asia
MiddleEast and Africa, Offering us rapid attain ability from sales, service, procurement and Transportation since inception,Pinxing
alwaysuphold the growth method of market place globalization. we segment and position consumers wants and ept industry.our
productsand support are broadly utilized in global sector, and functionality secure and protection.we personalized different motors for various
industries.

 

 

The use of authentic equipment manufacturer’s (OEM) portion quantities or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our business and the listed alternative areas contained herein are not sponsored, accepted, or made by the OEM.

3 manufacturing unit created in China - alternative components - in Jammu India Phase AC Electric Motor Sewage Pump Motor with best top quality

3 factory created in China - alternative elements - in Jammu India Section AC Electrical Motor Sewage Pump Motor with top high quality

Single near me made in China – replacement parts – in Detroit United States Three 3 Phase 0.1kw 0.2kw 0.4kw 0.55kw 0.75kw 1.1kw 1.5kw 2.2kw 3.7kw EPT ro Gear Motor with top quality

Single near me made in China - replacement parts - in Detroit United States Three 3 Stage .1kw .2kw .4kw .55kw .75kw 1.1kw 1.5kw 2.2kw 3.7kw EPT ro Equipment Motor with top quality

We – EPG Group the greatest gearbox & motors , couplings and gears factory in China with 5 diverse branches. For far more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13 571 88828 13858117778 571 88828

Solitary 3 3 Period .1KW .2KW .4KW .55KW .75KW 1.1KW 1.5KW 2.2KW 3.7KW Micro Gear Motor 

Attributes:
one) Energy: .1~3.7KW
two) Voltage: 100-380V
3) Torque: 34~1480N.m
four) Reduction ratio: 3~ 1800K

Item photograph:

Specification for AC equipment motor:

Motor kind Induction / Brake / Pace altering / Reversible / Torque…Motor
Body measurement 60 mm / 70mm / 80mm / 90mm / 104mm / 110mm / 130mm…
Running velocity Motor 1200-3000 rpm, Gear Ratio 1/3 ~ 1/1800
Output electrical power 6W / 10W / 15W / 25W / 40W / 60W / 90W / one hundred twenty W /140W / 2000W / 370W ……3700W
Output shaft 8mm ~ 50mm round shaft, D-lower shaft, crucial-way shaft, hollow shaft…
Voltage type Single Section 110V/220V 50Hz/60Hz
Three Phase 220V/380V 50Hz/60Hz
Equipment Brake / Connector / Terminal box / Capacitor / Controller…
 
Gearbox variety Parallel shaft
Correct angle hollow worm shaft Proper angle bevel hollow shaft Flat kind hollow shaft
Appropriate angle solid worm shaft Proper angle bevel reliable shaft Flat type solid shaft
Planetary middle shaft

FAQ

Q: Can you make the equipment motor with customization?
A: Indeed, we can customize per your request, like energy, voltage, speed, shaft dimensions, wires, connectors, capacitors, terminal box, IP quality, etc.

Q: Do you provide samples?
A: Of course. Sample is available for tests.

Q: What is your MOQ?
A: It is 10pcs for the beginning of our business.

Q: What is actually your direct time?
A: Standard item need to have 5-30days, a bit longer for custom-made items.

Q: Do you offer technologies support?
A: Yes. Our organization have style and advancement group, we can offer technology support if you
need.

Q: How to ship to us?
A: It is offered by air, or by sea, or by train.

Q: How to shell out the income?
A: T/T and L/C is preferred, with different forex, such as USD, EUR, RMB, etc.

Q: How can I know the solution is appropriate for me?
A: >1ST verify drawing and specification >2nd examination sample >3rd commence mass creation.

Q: Can I come to your business to go to?
A: Of course, you are welcome to check out us at any time.

Q: How shall we speak to you?
A: You can send inquiry directly, and we will respond inside of 24 hours.
 

The use of first products manufacturer’s (OEM) portion figures or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our company and the outlined substitution areas contained herein are not sponsored, authorized, or made by the OEM.

Single near me made in China - replacement parts - in Detroit United States Three 3 Stage .1kw .2kw .4kw .55kw .75kw 1.1kw 1.5kw 2.2kw 3.7kw EPT ro Gear Motor with best top quality

Single near me made in China - replacement parts - in Detroit United States Three 3 Phase .1kw .2kw .4kw .55kw .75kw 1.1kw 1.5kw 2.2kw 3.7kw EPT ro Gear Motor with best quality