Tag Archives: China gear coupling 102

Permanent China in Kakinada India full gear coupling shop Magnetic in Tur in Italy gear coupling 102 Synchronous Frequency Conversion Screw Compressor Air End with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Permanent magnetic synchronous frequency conversion screw compressor air end

I. Photos of our two rotor screw compressor air end:

II. Features and advantages
1. Features: adopt twin rotor/screw air end

2. Energy saving advantages:
(1). Adopt One-piece shaft of the permanent magnetic motor and the air end
★Permanent magnetic Motor’ rotor is directly sleeved on shaft of the air end, embedded integrated direct-connecting structure, without coupling part or transmission gear, namely one-piece shaft, ensure 100% transmission efficiency.
★Taper connection is adopted for motor, and it can be assembled and disassembled very simply.
(2). Adopt permanent magnetic synchronous frequency conversion EPT motor
★Permanent magnetic frequency conversion motor is the most advanced technical EPT motor, efficiency can be up to 97%, higher by 3%-5% than ordinary motor with frequency conversion device type, saving energy a lot obviously.
★Permanent magnetic EPT motor adopt high temperature resistance rare earth permanent magnet to ensure no demagnetization. Without motor bearing or sleeve, so no need lubricating grease, no need concern alignment problem, compact structure, saving space, convenient use and maintenance.
(3). Wide frequency conversion, constant pressure air feeding
★Frequency application scope (0HZ-200HZ) is wide, and motor efficiency under different load is basically constant.
★The motor is big torque, EPT adaptability and loaded startup.
★The whole machine work in frequency conversion state, and can operate frequency modulation according to the client’s actual requirement of air consumption at constant pressure, realizing high efficiency and energy saving.
(4). Running stable and reliable
★Machine starting on frequency conversion state, greatly reducing the impact to the power grid equipment, avoiding of damage to the EPT equipment, and saving EPT energy when starting.
★No need to set working pressure up and bottom limit value, can operate by regulating the frequency at the setting pressure point to stabilize the pressure, so can save EPT energy by 10%-15%.
(5). Energy saving a lot obviously

III. Technician parameters

Discharge pressure: 0.8Mpa
Model	TKYC55A/7.5	TKYC70A/11	TKYC70A/15	TKYC80A/18.5	TKYC80A/22	TKYC104R/30	TKYC104R/37
Parameter	TKYC55A/7.5	TKYC70A/11	TKYC70A/15	TKYC80A/18.5	TKYC80A/22	TKYC104R/30	TKYC104R/37
Rotate speed (rpm)	3500	3000	3800	3000	3600	3000	3600
shaft power (kw)	8.1	12.1	16	20.5	24	33	39.5
Air capacity (m3/min)	1.1	1.72	2.2	2.9	3.4	5.1	6

IV. Our factory and workshop:

V.After sales service for our air screw compressor product:
1. Providing professional air compression program designing for free.
2. Providing our factory original machine parts at lowest price after machine sales.
3. Providing training and guidance for free, customers can send their staff to our factory to learn how to operate the machines.
4. Warranty period: the screw main machine is one year, the bearing is one year, the wear parts of air intake valve, EPT components, electromagnetic valve, rate valve are 6 months
5. The air filter, oil filter, oil-water separator, lubricating oil, rubber parts and etc. are not included in warranty range.

VI. Certification and patents of our air compressor

FAQ:
Q1: Are you factory or trade company?
A1: We are professional air compressor designer and manufacturer in China.
Approved ISO9001-2008, SGS audited, and etc.
Q2: Warranty terms of your machine?
A2: One year warranty for the machine and technical support according to your needs.
Q3: Will you provide some spare parts of the machines?
A3: Yes, of course.
Q4: How long will you take to arrange production?
A4: 380V 50HZ we can delivery the goods within 20 days. Other voltage we will delivery within 30 days.
Q5: Can you accept OEM orders?
A5: Yes, with professional design team, OEM orders are highly welcome!

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

Permanent China in Kakinada India full gear coupling shop Magnetic in Tur in Italy gear coupling 102 Synchronous Frequency Conversion Screw Compressor Air End with top quality lowest price

Ring China in Visakhapatnam India falk 1020g20 sales Gear in Muscat Oman gear coupling 102 near me shop 145-15-42611 for D65A-8 Spare Parts with top quality lowest price

We – EPG Group the most significant couplings and gears manufacturing facility in China with 5 various branches. For much more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828 /

Ring Gear 145-fifteen-42611 for D65A-8 Spare Parts

HangZhou EPT Global Trade Co., Ltd is a professional supplier for the construction equipment parts product sales and generation.

We are largely engaged in equipment pump, bulldozer spare elements(like product D20, D21, D31, D41, D50A-16-seventeen, D60A-six-seven-8, D65A-6-seven-eight-twelve, D80A-12-18, D85A-18-21, D155A-1-2-three, D355A-35, D65E-twelve, D85ESS-two, D6D & D7G) excavator spare components (which includes model: PC200-one-2-three-five-six-7, PC300-1-3-five-six-7, PC400-one-three-five-six, PC650-one-three-5, E200B, 320, 320B. C) and motor areas etc.

Our key merchandise addresses: Loafer, thrust wheel, sprocket wheel, driving wheel, cylinder, cylinder service knit, universal coupling, torque converter, ring seal, clutch, hydraulic pump, slewing bearing. Components of motor handles: Crankshaft, camshaft, shaft bushing, connecting rod, cylinder human body, cylinder cap, water pump, oil pump, cylinder sleeve, piston, piston ring, motor, generator, filter aspect, services package, booster, gas injector, valve, hub, equipment and so on.

We have several several years international investing expertise in a wide variety of construction equipment spare elements discipline. Our merchandise quatity reaches planet-class stage as we have out a strict good quality & service management technique in order to satisfy our clients far better. “Good quality initial, customers foremost” is the support tenet that we adhere to all the time. Because the establishment of the company, many thanks to the kindness from all more than the globe, our items have exported to the United States, Russia, South The usa, Middle East, Southeast Asia and covering above twenty international locations and regions. Our reputable quality, competitive price tag and superior support has obtain market vast acceptance and buyer gratification at residence and overseas. We sincerely seem ahead to working with you to accomplish mutual reward and a better long term!

Our rewards:

one. Expert & excellent pre-sales, income and after-product sales service.

2. Excellent top quality: All our items are selected from the greatest factory in China. We will check merchandise strictly prior to sending to the customers.

3. Competitive price $ Timely delivery

4. 1-quit service. We can offer with various spare areas for your need, save your time to lookup the components if you want in urgent.

five. A single 12 months gurantee.

Contact Us :

/ The use of first gear manufacturer’s (OEM) component figures or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our firm and the outlined EPT areas contained herein are not sponsored, accredited, or made by the OEM. /

Ring China in Visakhapatnam India falk 1020g20 sales Gear in Muscat Oman gear coupling 102 near me shop 145-15-42611 for D65A-8 Spare Parts with top quality lowest price

PU China in Antananarivo Madagascar gear coupling 102 manufacturer Element in Cheongju Republic of Korea boston gear coupling near me Coupling, Polyurethane Element Coupling, Gr Element Coupling, GS Element Coupling with top quality lowest price

PU China in Antananarivo Madagascar gear coupling 102 manufacturer Element in Cheongju Republic of Korea boston gear coupling near me Coupling, Polyurethane Element Coupling, Gr Element Coupling, GS Element Coupling with top quality lowest price

We – EPG Team the largest couplings and gears manufacturing facility in China with 5 diverse branches. For much more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /

Adaptable couplings contrast with rigid couplings (rigid shaft couplings), which hook up shafts with a linear alignment. equipment coupling advantages It has set up stable cooperation with several effectively acknowledged universities and institutes in china this sort of as, Zhejiang University, Jilin University, Complex committee of countrywide chain drive regular, Institute of nationwide chain push, Zhejiang software engineering content institute, Huhan materials defense institute and it cooperated to located China Initial Car chain institute with Nationwide chain drive institute.

PU Factor Coupling, Polyurethane Aspect Coupling, GR Element Coupling, GS Factor Coupling (3A2006)

Description: the polyurethane elastomeric is a new content of polymer artificial amongst rubber and plastic. It has the two higher strength of plastic and substantial elasticity of rubber. Its attributes are: 1, a extensive range of hardness. It nonetheless has rubber elongation and resilience at large hardness. The polyurethane elastomeric has a hardness assortment of Shore A10-D80. two. high power. At rubber hardness, the tensile power, tear toughness and load carrying capacity are significantly higher than basic rubber substance. At higher hardness, its influence energy and flexural toughness are significantly greater than plastic content. three, wear-resistant. Its dress in resistance is extremely outstanding, typically in the assortment of .01-.10cm³/one.61km, about 3-5 moments than rubber materials. 4, oil resistant. The polyurethane elastomeric is a very polar polymer compound which has reduced affinity with non-polar mineral oil and is barely eroded in gasoline oil and mechanical oil. 5, great resistance to oxygen and ozone. 6, outstanding vibration absorption efficiency, can do damping and buffering. In the mould producing industry, it replaces rubber and springs.7, has excellent low temperature overall performance. eight, radiation resistance. Polyurethane is very resistant to high power radiation and has satisfactory overall performance at ten-10 deg radiation dose. nine, with excellent machining overall performance.

The polyurethane coupling, rubber coupling are created by injection with higher top quality TPU material or mould CSM/SBR. It is designing and particular for all varieties of steel shaft coupling with really good functionality of large tensile energy, higher dress in resistant, high elastic resilience, drinking water resistant, oil resistant and superb tiredness resilience, large effect resistant and so forth. We have full sets injection moulds and source full assortment of GR, GS, MT, ML, MH, Hb, HRC, L, T, NM and Equipment J series couplings and so forth. with high top quality and exceptional experience. Implement to all types of industrial metallic shaft coupling.

Specifications:

content: TPU, CSM/SBR, NBR, nylon and so on.

color: yellow, crimson, purple, inexperienced, black, beige and so forth.

floor: smooth

tensile toughness: 8-55Mpa

hardness: 70-98Shore A

elongation: four hundred%-650%

density: 1.25g/cm³

elasticity effect: >25%

tear strength: 35-155KN/m

akron abrasion reduction:<0.05cm³/1.61km

compression established (22h*70°C):<10%

operating temperature: 120°C

regular size for polyurethane coupling:

GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180

GS5, GS7, GS9, GS12, GS14, GS19, GS24, GS28, GS38, GS42, GS48, GS550, GS65, GS75

MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13

ML1, ML2, ML3, ML4, ML5, ML6, ML7, ML8, ML9, ML10, ML11, ML12, ML13

MH45, MH55, MH65, MH80, MH90, MH115, MH130, MH145, MH175, MH200

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/ninety five, L99/100, L110, L150, L190, L225, L276

FALK-R 10R, 20R, 30R, 40R, 50R, 60R, 70R, 80R

SBT T40, T45, T50, T55, T60, T65, T70, T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T185, T190, T210

Joong Ang CR0050, 0070, 0010, 0020, 2035, 2035A, 3545, 4560, 6070, 7080

MS0511, MS0714, MS1119, MS1424, MS1928, MS1938, MS2845, MS3860, MS4275, MS6510

D14, D14L, D20, D25, D30, D30L, D35, D40, D45, D49, D55, D65

5H, 6H, 7H, 8H, 9H, 10H, 11H

common size for rubber coupling:

Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/95, L99/100, L110, L150, L190, L225

NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265

NOR-MEX168-ten, NOR-MEX194-ten, NOR-MEX214-10, NOR-MEX240-10, NOR-MEX265-ten

FCL1#, FCL2#, FCL3#, FCL4#, FCL5#, FCL6#, FCL7#, FCL8#

FCL90, FCL100, FCL112, FCL125, FCL140, FCL160, FCL180, FCL200, FCL224, FCL250, FCL280, FCL315, FCL335, FCL400, FCL450, FCL560, FCL630

Gear 3J, 4J, 5J, 6J, 7J, 8J, 9J, 10J, 11J, 12J, 13J, 14J

Hytre 4H, 5H, 6H, 7H, 8H, 9H, 11H

Tyre F40, F50, F60, F70, F80, F90, F100, F110, F120, F140, F160

SBT T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T210

FCLpin #1, #two, #3, #four, #five, #6, #eight

GR42, GR48, GR55, GR65, GR75

DL1, DL2, DL3, DL4, DL5, DL6, DL7, DL8, DL9, DL10, DL11

common size for nylon coupling:

NL1, NL2, NL3, NL4, NL5, NL6, NL7, NL8, NL9, NL10

M28, M32, M38, M42, M48, M58, M65

packing in bags, cartons, pallets or crates

OEM & custom-made measurement are agreed

special provide all kinds of metal coupling for FCL, NM, MH, HRC, Love Pleasure, Joongang, Centafelx, XL-GR, Tyre

***when you enquiry, pls affirm sort, size variety and amount***

/ The use of first equipment manufacturer’s (OEM) component quantities or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our organization and the outlined alternative parts contained herein are not sponsored, accepted, or produced by the OEM. /

Huading China in Kottayam India teflon gear coupling price Swp-a in Astana Kazakhstan gear coupling 102 near me Cardan Shaft Coupling for Paper Machine with top quality lowest price

We – EPG Group the greatest couplings and gears manufacturing unit in China with 5 diverse branches. For far more information: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /

EPG ’s foundry operations are able of generating gray and ductile iron areas up to ten,000 lbs. for each solid element. Full-to-print capabilities mixed with a proven supply method empower EPG ’s to satisfy most casting requirements speedily and effectively, on-time and on-funds. lovejoy coupling installation With thorough requirments, we can also build your specific made solution. a specialised supplier of a entire assortment of chains, sprockets, gears, gear racks, V-belts, couplings and reducers， pto shaft, agricultural gearboxes….

SWP-A Extended Sort Mobile: +86-13083988828escopic Cardan Shaft Coupling

SWP-A split bearing support cardan shaft is lengthy type with size compensation.

SWP partition profile bearing the cross shaft universal coupling merchandise: alternative of bearings for, SWP type cardan design bearing split shaft bolt, suited for hoisting and conveying equipment and other hefty equipment, connecting two different axis transmission shaft, axis angle of A~F kind not far more than 10 levels, the G kind is not greater than five degrees.

Solution pictures

Huading is a specialist producer and supplier for cardan shaft, common joint and coupling(diaphragm coupling, flexible coupling, equipment coupling and so on.), our products have been exported to North The united states, Italy, France, Singapore, Sri Lanka, Mid East and other international locations.

Our Solutions
24 several hours on the web support
Enquiry will be replied in two hrs

Manufacturing unit Address:
No. 11 Fuyang Highway, ChengNan Industrial Park, Jingjiang City, Taizhou, Jiangsu, China
Net:http:///

FAQ
1. Are u a company?
We are a professional manufacturer specializing in manufacturing cardan shafts and various series of couplings. We supply couplings for the wholesalers and dealers from different countries.
2. Can you do OEM?
Yes, we can. We can do OEM & ODM for all the buyers with custom-made artworks of PDF or AI format.
3. How does your manufacturing unit do with regards to top quality control?
Good quality is priority! We always attach wonderful value to high quality managing from the very starting to the really finish:
one) First of all, we have specialised QC department to manage the top quality, and we also acknowledge the third formal federal government to examine the cargoes prior to shipping.
2) Secondly, we have all thorough documents for nonconformity items, then we will make summary according to these records, keep away from it come about again.
three) Thirdly, We do notice the pertinent codes of conduct & regulations from govt in setting, human proper facets like no youngsters labor, no prisoner labor and so on.
4. How can I get samples?
We are appreciated that new customers shell out for the convey price for samples and this charge will be deducted after orders are unveiled.

Welcome to personalize products from our factory and make sure you supply your
design and style drawings or make contact with us if you need other specifications.

Thanks.

/ The use of first tools manufacturer’s (OEM) component numbers or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our company and the listed substitution components contained herein are not sponsored, authorized, or produced by the OEM. /

Huading China in Kottayam India teflon gear coupling price Swp-a in Astana Kazakhstan gear coupling 102 near me Cardan Shaft Coupling for Paper Machine with top quality lowest price

Coupler China in Firozabad India gear coupling 102 sales Yoke in Comilla Bangladesh ameridrive coupling near me shop for Myanmar Railways with top quality lowest price

We – EPG Group the largest couplings and gears manufacturing facility in China with 5 various branches. For a lot more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828 /

Flexible couplings contrast with rigid couplings (rigid shaft couplings), which connect shafts with a linear alignment. China bowex coupling The new products incorporate a sequence of high-tech and higher top quality chains and sprockets and gears, this kind of as chains and gearboxes for agricultural machineries, metallurgical chains, escalator step-chains, high-speed tooth chains, timing chains, self-lubrication chains, amongst which have sort high velocity tooth chain for vehicle department dynamic box and aerial chains fill in the blanks of chain in China.
Coupler Yoke
Coupler yokes are functioned as a pocket for the draft equipment and to be employed for maintaining the gear in proximity to the tail finish of the coupler interposed by follower&interval Coupler yokes are connected with the rear conclude of coupler by yoke pin or draft essential&comma so that forces applied to the coupler head are dampened by the draft gear&period of time
As end result&comma yoke need to be made to be tailored to draft equipment and coupler shank finish&period For standardization of railway industrial&comma at a single hand&comma the yoke draft equipment pocket need to be suitable in duration and the vacation of draft equipment&time period And at other hand&comma the sharp of the entrance finish of the yoke must be suited for the putting in of the tail finish of the coupler shank&interval

TEDRAIL supply the casting steel yoke following AAR specification&period of time
n Content&colon AAR M-201 Grade E OR AAR M-201 Grade E&plus
n Warmth Remedy&colon QUENCHED AND TEMPERED
n Production&colon SAND Metal CASTING&period of time
n Type Contains&colon Y40AE&comma SY40AE&comma Y41AE&comma Y45AE&comma Y49AE&comma RY60267

TEDRAIL also could have the potential to offer the forging steel yoke following AAR requirements&colon
n Materials&colon AAR M-201 Quality E OR AAR M-201 Grade E&plus
n Warmth Remedy&colon QUENCHED AND TEMPERED
n Creation&colon Cast AND WELDED&comma THEN Warmth Handled&period
n Type Includes&colon Y40AE&comma SY40AE&comma Y41AE&comma Y45AE&comma Y49AE&comma RY60267
All coupler yoke ruled by following AAR Requirements&colon
l AAR M-201 General for Steel Castings
l AAR M-205 Coupler Yokes Test Needs
l AAR M-211 Purchase & Acceptance of AAR-Authorized Couplers and Coupler Yokes for Freight Provider
l AAR M-212 Couplers and Yokes&comma Secondhand – Classification and Reconditioning Treatment
l AAR S-139 Yokes&comma Relief Fillets
l AAR S-141 Yokes&comma E sort&comma Y40AE&comma Regular&comma for 24 5&sol8-in&comma Draft Gear Pocket
l AAR S-142 Yokes&comma E variety&comma Y41AE&comma Normal&comma for 24 five&sol8-in&comma Draft Equipment Pocket
l AAR S-143 Yokes&comma E variety&comma SY40AE OR YS93AE&comma Common&comma for 24 five&sol8-in&comma Draft Equipment Pocket
l AAR S-149 Yokes&comma F variety&comma Y45AE&comma Regular&comma for 24 five&sol8-in&comma Draft Equipment Pocket
l AAR S-151 Yokes&comma E&solF sort&comma Y49AE&comma Common&comma for 24 5&sol8-in&comma Draft Equipment Pocket

Kind	Material	Spec&lparAAR&rpar	Coupler Adaptation
Y40AE	M-201 Grade E M-201 Grade E&furthermore	M-201 M-211 M-205	Sort E Coupler E60DE SBE60DE SE60DE

Sort	Material	Spec	Coupler Adaptation
Y41AE	M-201 Quality E M-201 Quality E&plus	M-201 M-211 M-205	Sort E Coupler E60DE SBE60DE SE60DE

Kind	Materials	Spec	Coupler Adaptation
RY60267	M-201 Quality E M-201 Quality E&furthermore	M-201 M-211 M-205	Kind F Rotary Coupler F70DE

Variety	Substance	Spec	Coupler Adaptation
Y45AE	M-201 Grade E M-201 Grade E&in addition	M-201 M-211 M-205	Sort F coupler F70DE

Sort	Substance	Spec	Coupler Adaptation
Y49AE	M-201 Grade E M-201 Quality E&additionally	M-201 M-211 M-205	Sort E&solF coupler

Variety	Content	Spec	Coupler Adaptation
Australia Yoke	M-201 Quality E M-201 Grade E&in addition	M-201 M-211 M-205	Type Auatralia Coupler

/ The use of first equipment manufacturer’s (OEM) component quantities or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our organization and the listed replacement components contained herein are not sponsored, accredited, or manufactured by the OEM. /

Coupler China in Firozabad India gear coupling 102 sales Yoke in Comilla Bangladesh ameridrive coupling near me shop for Myanmar Railways with top quality lowest price