XINLAN analysis diaphragm coupling has a high power-to-mass ratio

1,Diaphragm couplingIt is not smooth and does not require maintenance. It can basically eliminate the vibration caused by the tooth surface wear of the gear coupling. Prevent a series of troubles such as new dissatisfaction of the gear coupling due to oil accumulation.
2. It can be assembled and disassembled without disturbing the master-slave installation. The coupling can be changed within 2 hours, which improves the equipment application rate.
3. It can operate under severe conditions, can operate within 300 degrees Celsius, can operate under corrosive conditions such as acid, alkali, salt spray, etc.
4. The ability to accept errors is strong, and to have the necessary ability to reduce vibration and noise. The ability to meet errors can meet the requirements of most parts of the power transmission installation and operation.
5. Zero clearance, constant low dissatisfaction trade-off, noise-free coupling parts are assembled without clearance, no running noise, and consistent initial dynamic balance accuracy
6. Applying predictable low additional load to the connected installation. Compared with similar flexible transmission elements, the diaphragm coupling exerts a predictable minimum effect force and bending moment on the connected installation.
7. It has a high power-to-mass ratio and is especially suitable for connecting high-power power installations
8. The non-linear change of the stiffness between the shafts effectively restricts the magnetic intermediate drift of the electric head.

The characteristics of the formed diaphragm: each coupling is composed of a single diaphragm. The thickness of the diaphragm is reduced from the inner radial to the outer hyperbola regularly to adhere to the premise of equal strength. The data application rate is high, the overall performance is good, and it is especially suitable for use. High-speed transmission, but the manufacturing precision of the diaphragm is high.
The characteristics of the corrugated diaphragm: the diaphragm is corrugated in the axial section, with high elasticity and good compensation function.The single-piece hyperbolic type with the same thickness and unequal thickness of the diaphragm has better functions, and is currently used more frequently.

The above is the XINLAN couplinghttp://www.gear-coupling.xyz>为你的分析，希望能为您提供帮助，如有什么问题请联系我们，我们会真诚为您提供服务。