XINLAN analyzes coupling injection molding

CouplingWhat is the best temperature measurement system? How do different temperature control systems affect the thermal balance of the mold?
I feel that the coupling is a deformation of the dynamic temperature control of the mold.This makes it possible to generate a large temperature gradient in a small area of ​​the mold in a very short time.If allowed, a significant elimination cooling time can be used.
Especially with the traditional temperature control system, it is even more so.For example, the coupling feels the fundamental mind of heating combined with several benefits.The heat is not conveyed by conduction, but is conveyed to the designated area of ​​the mold appearance accurately by the method of non-war, and its adjacent area is only slightly heated.Therefore, a very high temperature gradient can be generated on the cavity wall in a short time.
The similar temperature of the cavity can also reach the required value.The benefit of the surface effect is that only much less heat is transferred to the mold.In the fluid system, feel that the body is placed in an appropriate position.The heat channel conveys heat along the cavity wall.The result is that most parts of the mold that do not need to be heated are also heated. If the heat transferred to the mold can be quickly dissipated and lost, I feel that heating can only slightly extend the processing cycle.
The methods used for injection molding to feel the difference in heating are available for selection.In this project, in principle.The coupling researchers used two separate methods for the sensor body: an external sensor body; the sensor body is integrated into the injection mold.
Because there are fewer factors to consider in the mold plan, this deformation, which is different from the second deformation, does not need to innovate the mold. The first deformation provides the greatest degree of freedom.Because it is equipped with a handle unit to move the sensor body into the opened mold and position it to the front of the heated mold cavity.
To ensure that the corresponding areas in the mold can be selectively heated, integrating the sensor body into the injection mold is a big challenge.The planner must carry out plan measurement to ensure that the sensor body and the necessary connection unit circuits and waterways can be integrated into the mold.at the same time.And refrain from heating other areas that do not need to be heated.
 

Botou XINLAN Coupling Co., Ltd. is an enterprise specializing in the research and production of couplings.Our company has a variety of equipment and strong technical force. It is a manufacturer of various types of couplings. The main products are: various star- shaped elastic couplings, tire couplings, universal couplings, drum gears Type coupling, plum-shaped elastic coupling, rigid coupling, slider coupling, roller chain coupling, diaphragm coupling, elastic sleeve pin coupling, elastic pin coupling, Elastic pin gear coupling, water pump coupling, etc.