Description of technical requirements for hydraulic flange coupling

The following is XINLANCouplingThe analytical technical requirements are as follows:
1)液压法兰联轴器，锥孔与轴上锥体配合应良好，使85%以上面积均匀接触，且每25MM*25MM面积上具有不少于4—6个油斑点。配合面粗造度不低于R1.6UM。
(2) The machining quality of the coupling is the same as that of the forged flange.The remaining technical requirements shall comply with the provisions of the technical documents.Forgings should be annealed at high temperature, and quenched and tempered after rough machining.
(3) The oil pump and screw plugs used in the disassembly and assembly of the hydraulic coupling should be thoroughly cleaned, and the oil used should be carefully filtered, and no dirt or scratches on each contact surface are allowed.

Botou XINLAN Coupling Co., Ltd. is an enterprise specializing in the research and production of couplings.Our company has a variety of equipment and strong technical force. It is a manufacturer of various types of couplings. The main products are: various star-shaped elastic couplings, tire couplings, universal couplings, drum gears Type couplings, plum-shaped elastic couplings, rigid couplings, slider couplings, roller chain couplings, diaphragm couplings, elastic sleeve pin couplings, elastic pin couplings , Elastic pin gear coupling, water pump coupling.