Product Description
Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling
Product Description
Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.
Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc
Coupling performance
1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CHINAMFG requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.
How to select the appropriate coupling type
The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.
If you cannot determine the type, you can contact our professional engineer
Related products
Company Profile
Our Equipments
Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.
Machining equipments
Heat equipment
Our Factory
Application – Photos from our partner customers
Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Advantages of Using Gear Couplings in Mechanical Systems
Gear couplings offer several advantages that make them a popular choice for connecting shafts in mechanical systems. Some of the key advantages include:
- High Torque Capacity: Gear couplings are designed to handle high torque loads, making them suitable for heavy-duty applications that require efficient power transmission.
- Misalignment Compensation: One of the significant advantages of gear couplings is their ability to accommodate various types of misalignment between the connected shafts, including angular, parallel, and axial misalignments. This flexibility helps reduce stress on the connected equipment and improves overall system performance.
- Shock and Vibration Dampening: The meshing of the gear teeth in a gear coupling provides inherent shock and vibration dampening capabilities. This feature helps protect the connected components from sudden impact loads and reduces wear and tear.
- Compact Design: Gear couplings have a compact design, which allows for easy installation even in tight spaces or limited clearance applications.
- High Reliability: Due to their robust construction and excellent torque transmission capabilities, gear couplings are known for their reliability and durability, ensuring long service life in demanding conditions.
- Easy Maintenance: Gear couplings are relatively easy to maintain. Regular inspection and proper lubrication help ensure smooth operation and extend the coupling’s life span.
- Wide Range of Sizes and Configurations: Gear couplings are available in various sizes and configurations, making it possible to find a suitable coupling for a wide range of applications.
- Suitable for High-Speed Applications: Gear couplings can be designed to handle high rotational speeds, making them suitable for applications where high-speed shaft connections are required.
- Temperature and Environment Tolerance: Gear couplings are often made from materials that can withstand high temperatures and harsh environmental conditions, making them suitable for use in challenging industrial settings.
Overall, gear couplings provide a reliable and efficient means of transmitting power between rotating shafts, particularly in heavy-duty and high-torque applications. Their ability to accommodate misalignment and dampen vibrations helps protect connected equipment and contributes to the smooth operation of mechanical systems.
editor by CX 2024-01-03
China manufacturer Flexible Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Coupling gear coupling
Product Description
Flexible Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Coupling
What Industries Commonly Use Gear Couplings for Power Transmission?
Gear couplings are widely used in various industries for power transmission due to their ability to transmit high torque loads and accommodate misalignments. Some of the industries that commonly utilize gear couplings include:
- Steel Industry: Gear couplings are extensively used in the steel industry for connecting heavy-duty equipment like rolling mills, continuous casting machines, and other steel processing machinery.
- Mining and Quarrying: In mining and quarrying applications, gear couplings are employed to transmit power in conveyor systems, crushers, and heavy excavating machinery.
- Pulp and Paper: The pulp and paper industry uses gear couplings in machines like paper mills, pulp refiners, and stock preparation equipment.
- Marine: Gear couplings are utilized in marine propulsion systems, providing a reliable connection between the engine and the propeller shafts.
- Oil and Gas: Gear couplings find use in the oil and gas industry for connecting pumps, compressors, and other equipment used in upstream and downstream operations.
- Power Generation: Gear couplings are employed in power plants to connect generators, turbines, and other rotating equipment.
- Automotive: Gear couplings are used in automotive applications, particularly in heavy-duty vehicles and machinery like off-road vehicles, construction equipment, and agricultural machinery.
- Chemical and Petrochemical: In chemical processing plants, gear couplings are employed in agitators, mixers, and various equipment where power transmission is crucial.
- Cement and Aggregate: Gear couplings are used in cement plants and aggregate processing equipment for power transmission in crushers, kilns, and conveyors.
These are just a few examples, and gear couplings can be found in various other industries where reliable power transmission is essential. Their robust design and ability to withstand harsh operating conditions make them a popular choice for heavy-duty applications across different sectors.
editor by CX 2023-12-04
China factory Flexible Flex Fluid Chain Jaw Flange Gear Rigid Spacer Pin HRC Mh Nm Universal Fenaflex Oldham Spline Clamp Tyre Grid Hydraulic Servo Motor Shaft Coupling gear coupling
Product Description
Flexible flex Fluid Chain Jaw flange Gear Rigid Spacer PIN HRC MH NM universal Fenaflex Oldham spline clamp tyre grid hydraulic servo motor shaft Coupling
Product Description
The function of Shaft coupling:
1. Shafts for connecting separately manufactured units such as motors and generators.
2. If any axis is misaligned.
3. Provides mechanical flexibility.
4. Absorb the transmission of impact load.
5. Prevent overload
We can provide the following couplings.
| Rigid coupling | Flange coupling | Oldham coupling |
| Sleeve or muff coupling | Gear coupling | Bellow coupling |
| Split muff coupling | Flexible coupling | Fluid coupling |
| Clamp or split-muff or compression coupling | Universal coupling | Variable speed coupling |
| Bushed pin-type coupling | Diaphragm coupling | Constant speed coupling |
Company Profile
We are an industrial company specializing in the production of couplings. It has 3 branches: steel casting, forging, and heat treatment. Main products: cross shaft universal coupling, drum gear coupling, non-metallic elastic element coupling, rigid coupling, etc.
The company mainly produces the industry standard JB3241-91 swap JB5513-91 swc. JB3242-93 swz series universal coupling with spider type. It can also design and produce various non-standard universal couplings, other couplings, and mechanical products for users according to special requirements. Currently, the products are mainly sold to major steel companies at home and abroad, the metallurgical steel rolling industry, and leading engine manufacturers, with an annual production capacity of more than 7000 sets.
The company’s quality policy is “quality for survival, variety for development.” In August 2000, the national quality system certification authority audited that its quality assurance system met the requirements of GB/T19002-1994 IDT ISO9002:1994 and obtained the quality system certification certificate with the registration number 0900B5711. It is the first enterprise in the coupling production industry in HangZhou City that passed the ISO9002 quality and constitution certification.
The company pursues the business purpose of “reliable quality, the supremacy of reputation, commitment to business and customer satisfaction” and welcomes customers at home and abroad to choose our products.
At the same time, the company has established long-term cooperative relations with many enterprises and warmly welcomes friends from all walks of life to visit, investigate and negotiate business!
How to use the coupling safely
The coupling is an intermediate connecting part of each motion mechanism, which directly impacts the regular operation of each motion mechanism. Therefore, attention must be paid to:
1. The coupling is not allowed to have more than the specified axis deflection and radial displacement so as not to affect its transmission performance.
2. The bolts of the LINS coupling shall not be loose or damaged.
3. Gear coupling and cross slide coupling shall be lubricated regularly, and lubricating grease shall be added every 2-3 months to avoid severe wear of gear teeth and serious consequences.
4. The tooth width contact length of gear coupling shall not be less than 70%; Its axial displacement shall not be more significant than 5mm
5. The coupling is not allowed to have cracks. If there are cracks, it needs to be replaced (they can be knocked with a small hammer and judged according to the sound).
6. The keys of LINS coupling shall be closely matched and shall not be loosened.
7. The tooth thickness of the gear coupling is worn. When the lifting mechanism exceeds 15% of the original tooth thickness, the operating mechanism exceeds 25%, and the broken tooth is also scrapped.
8. If the elastic ring of the pin coupling and the sealing ring of the gear coupling is damaged or aged, they should be replaced in time.
Certifications
Packaging & Shipping
How Does a Gear Coupling Protect Connected Equipment from Shock Loads and Vibrations?
Gear couplings are designed to provide excellent protection to connected equipment from shock loads and vibrations, making them ideal for use in demanding and heavy-duty applications. The design and features of gear couplings that contribute to this protection include:
- Flexible and Rigid Elements: Gear couplings consist of two hubs with external gears that mesh together. Between these two hubs, there is a center sleeve with internal gear teeth. The center sleeve acts as a flexible element, while the outer hubs act as rigid elements. This combination allows the gear coupling to transmit torque while absorbing and dampening shock loads and vibrations.
- Misalignment Compensation: Gear couplings can accommodate angular, parallel, and axial misalignment between shafts. When the connected equipment experiences misalignment due to dynamic forces or shock loads, the gear coupling can flex and adjust to these changes, preventing excessive stress on the shafts and equipment.
- High Torsional Stiffness: Gear couplings offer high torsional stiffness, meaning they have minimal angular deflection under load. This stiffness helps maintain precise alignment and reduces the likelihood of damage to the connected equipment caused by misalignment-induced vibrations.
- Load Distribution: The toothed gear design of gear couplings ensures a large surface area of contact between the gears. This spreads the torque evenly across the gear teeth, resulting in a uniform distribution of load and reducing the concentration of stress on specific areas.
- Damping Characteristics: The flexible center sleeve in the gear coupling acts as a damping element that absorbs and dissipates vibrations, further protecting the connected equipment from harmful oscillations.
- High-Speed Balancing: Gear couplings are precisely balanced during manufacturing to minimize vibrations and ensure smooth operation even at high speeds. Proper balancing helps prevent resonances and reduces the impact of shock loads on the connected equipment.
By effectively absorbing and dampening shock loads and vibrations, gear couplings extend the life of the connected equipment and surrounding components, reduce maintenance requirements, and contribute to a more reliable and efficient mechanical system. However, it is essential to select the appropriate size and type of gear coupling based on the specific application and operating conditions to ensure optimal protection and performance.
editor by CX 2023-12-01
China factory Flange Cast Iron Coupling Steel Universal Joint Cardan Pump Rubber Motor Disc Curved Tooth Flex Rigid Drive Shaft Nm Yox Fluid Jaw Flexible Chain Gear Couplings gear coupling
Product Description
Flange Cast Iron Coupling Steel Universal Joint Cardan Pump Rubber Motor Disc CHINAMFG Flex Rigid Drive Shaft NM yox Fluid Jaw Flexible Chain Gear Couplings
Manufacturer of Couplings, Fluid Coupling, JAW Coupling, can interchange and replacement of lovejoy coupling and so on.
A coupling can interchange and replacement of lovejoy coupling is a device used to connect 2 shafts together at their ends for the purpose of transmitting power. The primary purpose of couplings is to join 2 pieces of rotating equipment while permitting some degree of misalignment or end movement or both. In a more general context, a coupling can also be a mechanical device that serves to connect the ends of adjacent parts or objects. Couplings do not normally allow disconnection of shafts during operation, however there are torque limiting couplings which can slip or disconnect when some torque limit is exceeded. Selection, installation and maintenance of couplings can lead to reduced maintenance time and maintenance cost.
Coupling is a jaw type coupling that works for a variety of light duty to heavy duty motors used in electric power transmission.
This is 1 of our safest types of products. The reason being that these couplings work even when the elastomer fails and there is no metal to metal contact.
They perform in well-standing oil, grease, moisture, sand, and dirt and nearly 850,000 bore combinations that can be customised as per the customer’s needs.
They are used in light-weight, medium, or heavy electrical motors and devices for power transmission through internal combustion.
Production workshop:
Company information:
Advantages of Using Gear Couplings in Mechanical Systems
Gear couplings offer several advantages that make them a popular choice for connecting shafts in mechanical systems. Some of the key advantages include:
- High Torque Capacity: Gear couplings are designed to handle high torque loads, making them suitable for heavy-duty applications that require efficient power transmission.
- Misalignment Compensation: One of the significant advantages of gear couplings is their ability to accommodate various types of misalignment between the connected shafts, including angular, parallel, and axial misalignments. This flexibility helps reduce stress on the connected equipment and improves overall system performance.
- Shock and Vibration Dampening: The meshing of the gear teeth in a gear coupling provides inherent shock and vibration dampening capabilities. This feature helps protect the connected components from sudden impact loads and reduces wear and tear.
- Compact Design: Gear couplings have a compact design, which allows for easy installation even in tight spaces or limited clearance applications.
- High Reliability: Due to their robust construction and excellent torque transmission capabilities, gear couplings are known for their reliability and durability, ensuring long service life in demanding conditions.
- Easy Maintenance: Gear couplings are relatively easy to maintain. Regular inspection and proper lubrication help ensure smooth operation and extend the coupling’s life span.
- Wide Range of Sizes and Configurations: Gear couplings are available in various sizes and configurations, making it possible to find a suitable coupling for a wide range of applications.
- Suitable for High-Speed Applications: Gear couplings can be designed to handle high rotational speeds, making them suitable for applications where high-speed shaft connections are required.
- Temperature and Environment Tolerance: Gear couplings are often made from materials that can withstand high temperatures and harsh environmental conditions, making them suitable for use in challenging industrial settings.
Overall, gear couplings provide a reliable and efficient means of transmitting power between rotating shafts, particularly in heavy-duty and high-torque applications. Their ability to accommodate misalignment and dampen vibrations helps protect connected equipment and contributes to the smooth operation of mechanical systems.
editor by CX 2023-11-30
China wholesaler Flexible Flex Fluid Chain Jaw Flange Gear Rigid Spacer Pin HRC Mh Nm Universal Fenaflex Oldham Spline Clamp Tyre Grid Hydraulic Servo Motor Shaft Coupling gear coupling
Product Description
Flexible flex Fluid Chain Jaw flange Gear Rigid Spacer PIN HRC MH NM universal Fenaflex Oldham spline clamp tyre grid hydraulic servo motor shaft Coupling
Product Description
The function of Shaft coupling:
1. Shafts for connecting separately manufactured units such as motors and generators.
2. If any axis is misaligned.
3. Provides mechanical flexibility.
4. Absorb the transmission of impact load.
5. Prevent overload
We can provide the following couplings.
| Rigid coupling | Flange coupling | Oldham coupling |
| Sleeve or muff coupling | Gear coupling | Bellow coupling |
| Split muff coupling | Flexible coupling | Fluid coupling |
| Clamp or split-muff or compression coupling | Universal coupling | Variable speed coupling |
| Bushed pin-type coupling | Diaphragm coupling | Constant speed coupling |
Company Profile
We are an industrial company specializing in the production of couplings. It has 3 branches: steel casting, forging, and heat treatment. Main products: cross shaft universal coupling, drum gear coupling, non-metallic elastic element coupling, rigid coupling, etc.
The company mainly produces the industry standard JB3241-91 swap JB5513-91 swc. JB3242-93 swz series universal coupling with spider type. It can also design and produce various non-standard universal couplings, other couplings, and mechanical products for users according to special requirements. Currently, the products are mainly sold to major steel companies at home and abroad, the metallurgical steel rolling industry, and leading engine manufacturers, with an annual production capacity of more than 7000 sets.
The company’s quality policy is “quality for survival, variety for development.” In August 2000, the national quality system certification authority audited that its quality assurance system met the requirements of GB/T19002-1994 IDT ISO9002:1994 and obtained the quality system certification certificate with the registration number 0900B5711. It is the first enterprise in the coupling production industry in HangZhou City that passed the ISO9002 quality and constitution certification.
The company pursues the business purpose of “reliable quality, the supremacy of reputation, commitment to business and customer satisfaction” and welcomes customers at home and abroad to choose our products.
At the same time, the company has established long-term cooperative relations with many enterprises and warmly welcomes friends from all walks of life to visit, investigate and negotiate business!
How to use the coupling safely
The coupling is an intermediate connecting part of each motion mechanism, which directly impacts the regular operation of each motion mechanism. Therefore, attention must be paid to:
1. The coupling is not allowed to have more than the specified axis deflection and radial displacement so as not to affect its transmission performance.
2. The bolts of the LINS coupling shall not be loose or damaged.
3. Gear coupling and cross slide coupling shall be lubricated regularly, and lubricating grease shall be added every 2-3 months to avoid severe wear of gear teeth and serious consequences.
4. The tooth width contact length of gear coupling shall not be less than 70%; Its axial displacement shall not be more significant than 5mm
5. The coupling is not allowed to have cracks. If there are cracks, it needs to be replaced (they can be knocked with a small hammer and judged according to the sound).
6. The keys of LINS coupling shall be closely matched and shall not be loosened.
7. The tooth thickness of the gear coupling is worn. When the lifting mechanism exceeds 15% of the original tooth thickness, the operating mechanism exceeds 25%, and the broken tooth is also scrapped.
8. If the elastic ring of the pin coupling and the sealing ring of the gear coupling is damaged or aged, they should be replaced in time.
Certifications
Packaging & Shipping
Are There Any Safety Considerations When Using Gear Couplings in Rotating Machinery?
Yes, there are several safety considerations to keep in mind when using gear couplings in rotating machinery:
- Guarding: It is essential to provide adequate guarding around gear couplings and other rotating parts to prevent accidental contact with moving components. Proper guarding helps protect personnel from potential entanglement, pinch points, or other hazards.
- Maintenance and Inspection: Regular maintenance and inspection of gear couplings are critical to ensure their safe and reliable operation. This includes checking for signs of wear, lubrication levels, and any abnormalities in the coupling’s performance.
- Lubrication: Proper lubrication of the gear coupling is essential to reduce friction, wear, and heat generation. Follow the manufacturer’s guidelines for lubrication intervals and use the recommended lubricant type.
- Temperature Monitoring: In high-speed or high-temperature applications, it is advisable to monitor the temperature of the gear coupling during operation. Excessive heat can indicate issues with lubrication or alignment that need immediate attention.
- Alignment: Ensure proper alignment of the connected shafts and gear coupling during installation. Misalignment can lead to increased wear, vibration, and premature failure of the coupling.
- Torque and Speed Limitations: Adhere to the specified torque and speed limitations provided by the gear coupling manufacturer. Operating the coupling beyond its rated capacity can result in failures and safety hazards.
- Emergency Shutdown: Machinery equipped with gear couplings should have an accessible and effective emergency shutdown mechanism to quickly stop the equipment in case of emergencies.
- Training: Provide proper training to personnel who work with or around machinery equipped with gear couplings. Training should cover safety protocols, coupling maintenance procedures, and the potential hazards associated with the equipment.
- Replace Damaged Couplings: If a gear coupling shows signs of damage, excessive wear, or malfunction, it should be replaced promptly to prevent potential accidents or equipment breakdowns.
Following these safety considerations can help ensure the safe and efficient operation of rotating machinery equipped with gear couplings. Regular maintenance, adherence to safety guidelines, and proper training contribute to a safer working environment and prolong the service life of gear couplings and the connected equipment.
editor by CX 2023-09-30
in Culiacan Mexico sales price shop near me near me shop factory supplier 1500W Gh AC Gear Horizontal Motor with 32mm Output Shaft manufacturer best Cost Custom Cheap wholesaler
Thanks to our extensive product variety and prosperous encounters in this business, ensures the stability and regularity of the essential purpose of factors. Our product selection contains all varieties of helical gear, spur equipment, bevel equipment, gear rack, worm equipment, sprockets,chains, bearings.
Item description
CH/CV horizontal EPTT , helical EPT motor (with the brake) frequently known as reduction motor small EPT motors , is a variety of velocity EPT motor and motor (motor) the integration of the human body. This integration physique generally can also be called EPT motor, typically assembled by the integration following complete supply by a expert EPT motor factory . The EPTed motor broadly employed metal sector, EPTTry sector, or assembled with magnetic powEPTTclutch and brake , and so on. Ac EPT motor is EPTTly through the motor, inner combustion engines or other large pace operating EPTT by way of the low rpm ac EPT motor enter shaft of the significantly less quantity of EPT engagement on the output shaft of large EPT to accomplish the goal of the slowdown.
Our reduction EPTed motor Advantage
1,realistic cost with superb top quality
2,shipping in time
three,protected ,reliable ,inexpensive and tough
4,stable EPTT ,peaceful operation
five,smooth working and low noise
six,nice look ,resilient service existence
7,high warmth-radiating efficiency ,large carrying capacity
eight,each and every EPTT must be tested before EPTT
nine.reply in large effectiveness in the course of a single operating day
ten. professional to create EPTT and electric motor .
If there is any issue, you should will not be reluctant to make contact with with me (EVA), U can send us your inquiry. And you will get reaction in one doing work working day.
EPT CATALOGUE :
FAQ
one, Q:what is your MOQ for ac EPEPT ?
A: 1pc is alright for each and every sort electric EPT box motor
two, Q: What about your warranty for your induction pace EPEPT ?
A: a single yr ,but except gentleman-produced destroyed
3, Q: which payment way you can acknowledge ?
A: TT, western union .
four, Q: how about your payment way ?
A: a hundred%payment in EPTd much less $5000 ,thirty% payment in EPTd payment , 70% payment ahead of sending above $5000.
five, Q: how about your EPTT of speed reduction motor ?
A: plywood circumstance ,if dimension is tiny ,we will pack with pallet for considerably less a single container
six, Q: What info should be provided, if I get electric helical EPTed motor from you ?
A: rated EPTT, ratio or output velocity,sort ,voltage , mounting way , quantity , if far more is EPT ,
in Padova Italy sales price shop near me near me shop factory supplier Main Shaft Gear Skating Safety Samsung Watch Plastic Crown Pinion Uchida Pump Sumitomo Motors Rock Climbing Savage Spiral Bevel Snorkel Fitness Custom Motor manufacturer best Cost Custom Cheap wholesaler
we offer chromed bar and tubes for hydualic and pheumatic cylinders. The group has taken portion in the making and revising of ISO/TC100 international chain common several years in good results and hosted the sixteenth ISO/TC100 Global annual meeting in 2004. Because of to our extensive item variety and prosperous experiences in this business,
Principal shaft EPT skating basic safety samsung observe plastic crown pinion uchida pump sumitomo motors rock climbing savage spiral EPTTl snorkel health personalized motor
Foot-Mounted vector control of 3 phase induction motor near me made in China – replacement parts – in Santiago Chile Helical-Worm Gear Reducer with Solid Shaft Gear Motor with top quality
We – EPG Team the largest worm gearbox, couplings and gears manufacturing facility in China with 5 various branches. For more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /
EWS sequence adopts helical gear – worm equipment pace reducer motor built-in drive to enhance the torque and performance of the speed reducer with wide assortment of rotating pace and excellent universality, it is applicable to varied installation modes and functions secure and reliable overall performance, and lengthy service existence, furthermore, it also complies with the international regular.
Attribute benefit
one.Combination of helical gear and worm, vertical output, compact structure, higher velocity ratio.
2.The concave-convex area of the solution gives the purpose of heat dissipation, and attributes strong vibration absorption, reduced temperature rise, reduced sound.
3.The merchandise attributes higher push precision, and is specially suitable for the web site with repeated begin, is can be related with varied pace reducers and configuring assorted motor drives, and can be installed at the 90º push procedure website.
Specification parameter
Installation type : Foot,flange,little flange,torque arm.
Output kind : Solid shaft,hollow shaft,hollow shaft with shrink disk,spline hollow shaft.
Enter variety : Motor,enter shaft and flange
technical parameters : ratio i=23.8~389,mix of EWS/EWR is up to26688
Efficiency : ratio i=23.8~389,seventy seven%ratio i=73.7~389,sixty two%and blend of EWS/EWR57%.
Industrial Application
Electrical power Plant Equipment
Metallurgical Industry
Steel Forming Machinery
Petrochemical Industry
Mining Machine
Hoisting Machinery
Development Industry
Environmental Safety Industry
Cable Industry
Foodstuff Machinery
Certificates
Passed ” ISO 9001 Intercontinental Good quality Method Certification”,”Europe CE Certification”, ” Swiss SGS Certificate”,”Large-tech business certificate of ZheJiang metropolis”,”Exceptional functionality management enterprise of ZheJiang metropolis”,and so forth.
FAQ
one. Q: Can you make as for every custom drawing?
A: Of course, we provide tailored support for customers.
2. Q: Are you a factory or ept business?
A. We are maker in ZheJiang China.
three. Q: What is your MOQ?
A: One particular piece.
four. Q: What is actually your production time?
A: 7-fifteen wor ept times soon after obtaining payment.
five. Q: What is your payment phrases?
A: T/T, 30% payment in advance, 70% harmony payment must be paid just before delivery.
six. Q: What is your package deal?
A: In wooden box packaging.
ZheJiang ept Equipment Reducer Co.,Ltd., former a joint enterprise invested by is a ZheJiang EAST PUMP Group and Effectively Business of The us.We are skilled producer of the equipment reducers and focus in the equipment reducers area in China for twenty years. ept has excellent R&D group,prime-ran ept generation and check tools.So we have the powerful electrical power in the creating and manufacturing the expectations variety as well as the customized kind equipment reducer for our consumers.
/ The use of authentic equipment manufacturer’s (OEM) part numbers or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating merchandise use and compatibility. Our organization and the detailed substitute areas contained herein are not sponsored, accredited, or produced by the OEM. /
Nmrv n20 vs n26 motor near me shop made in China – replacement parts – in San Pedro Sula Honduras Series Hollow Shaft Worm Reducer Worm Gear Box for Machines with top quality
We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 diverse branches. For much more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /
Solution Title: Gearbox
Purposes:
The merchandise are extensively applied in electricity, coal, cement, metallurgy, harbor, agriculture, delivery, lifting, surroundings defense, phase, logistic, weaving, paper creating, gentle business, plastics and other regions.
Basic Description:
one. Housing:
Die-forged Aluminium Alloy Gearbox (RV571~RV090)Cast Iron Gearbox (RV110~RV150)
2. Worm Wheel: Wearable Tin Bronze Alloy, Aluminum Bronze Alloy
3. Worm Shaft: 20Cr Steel, carburizing, quenching, grinding, surface hardness 56-62HRC, .3-.5mm remaining carburized layer soon after exact grinding
4. Enter Configurations:
Equipped with Electrical Motors (AC Motor, Brake Motor, DC Motor, Servo Motor)
IEC-normalized Motor Flange
Solid Shaft Input
Worm Shaft Tail Extension Input
5. Output Configurations:
Keyed Hollow Shaft Output
Hollow Shaft with Output Flange
Plug-in Strong Shaft Output
6. Spare Elements: Worm Shaft Tail Extension, Single Output Shaft, Double Output Shaft, Output Flange, Torque Arm, Dust Cover
7. Gearbox Painting:
Aluminium Alloy Gearbox:
After Shot Blasting, Anticorrosion Treatment method and Phosphating, Paint with the Colour of RAL 5571 Gentian Blue or RAL 7035 Gentle Grey
Forged Iron Gearbox:
After Portray with Purple Antirust Paint, Paint with the Colour of RAL 5571 Gentian Blue
Versions:
Hollow Shaft Input with IEC-normalized Motor Flange
RV571~RV150
Strong Shaft Enter
RV571~RV150
Features:
1. Top quality aluminum alloy gear box, light-weight excess weight and not rust
2. 2 optional worm wheel materials: Tin bronze or aluminum bronze alloy
3. Regular components and very versatile for shaft configurations and motor flange interface
four. A number of optional mounting choices
5. Reduced sounds, High performance in warmth dissipation
Gearbox Technical Info:
| Designs | Rated Power | Rated Ratio | Input Hole Dia. | Input Shaft Dia. | Output Hole Dia. | Output Shaft Dia. | Center Distance |
| RV571 | .06KW~.12KW | 5~sixty | Φ9 | Φ9 | Φ11 | Φ11 | 25mm |
| RV030 | .06KW~.25KW | five~eighty | Φ9(Φ11) | Φ9 | Φ14 | Φ14 | 30mm |
| RV040 | .09KW~.55KW | five~one hundred | Φ9(Φ11,Φ14) | Φ11 | Φ18(Φ19) | Φ18 | 40mm |
| RV050 | .12KW~1.5KW | 5~one hundred | Φ11(Φ14,Φ19) | Φ14 | Φ25(Φ24) | Φ25 | 50mm |
| RV063 | .18KW~2.2KW | seven.5~a hundred | Φ14(Φ19,Φ24) | Φ19 | Φ25(Φ28) | Φ25 | 63mm |
| RV075 | .25KW~4.0KW | 7.5~a hundred | Φ14(Φ19,Φ24,Φ28) | Φ24 | Φ28(Φ35) | Φ28 | 75mm |
| RV090 | .37KW~4.0KW | seven.5~a hundred | Φ19(Φ24,Φ28) | Φ24 | Φ35(Φ38) | Φ35 | 90mm |
| RV110 | .55KW~7.5KW | seven.5~one hundred | Φ19(Φ24,Φ28,Φ38) | Φ28 | Φ42 | Φ42 | 110mm |
| RV130 | .75KW~7.5KW | seven.5~100 | Φ24(Φ28,Φ38) | Φ30 | Φ45 | Φ45 | 130mm |
| RV150 | 2.2KW~15KW | seven.5~a hundred | Φ28(Φ38,Φ42) | Φ35 | Φ50 | Φ50 | 150mm |
Ratio: 5, 7.5, 10, fifteen, 20, twenty five, 30, forty, 50, sixty, eighty, a hundred
Installation:
Flange Mounted
Foot Mounted
Torque Arm Mounted
Lubrication:
Grease Lubrication
Oil-bath and Splash Lubrication
Cooling:
Natural Cooling
Our Generation and Packing:
FAQ:
Q: Do you supply OEM services?
A: Indeed.
Q: What is your payment conditions?
A: 30% T/T as deposit in advance, 70% stability following receipt of the copy of B/L or just before shipment.
Also we do L/C at sight, D/P, West Union, Cash Gram and so on.
Q: What is your direct time?
A: About 5-ten wor ept days for LCL cargo get and about 20days for container order following receipt the deposit or original irrevocable L/C.
Q: What certifiicate do you have?
A: We have CE, ISO, SASO. And we can implement for particular certificates for distinct nations around the world demand from customers.
Q:How extended is your merchandise guarantee?
A: 12months good quality guarantee.
If the motor is ruined or can not perform normally owing to the manufacturing defects, our business will repair and change the spare components or comprehensive motors by totally free of demand.
Why Us?
a. Factory Costs — with advanced lamination,casting,rotor pouring, winding, portray, screening and pac ept machines, all of main materials are made by ourselves which saved the production value a good deal which offers clients more earnings to resell or distribute.
b.Guaranteed Quality — Ideal visual appeal, lower sound, no heating also slight vibration helps make high quality items. Also we do 100% new content,100% cooper wire,one hundred% power, 100% tested certified prior to shipment.
c.Professional Services — In 12hours to reply you all inquiries and queries, also a lot knowledgeable revenue can source you good answers and cooperate with you quite effectively on equally just before and following sale.
Welcome to get in touch with with us !
/ The use of original tools manufacturer’s (OEM) element quantities or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our business and the shown alternative components contained herein are not sponsored, accredited, or made by the OEM. /
Best China manufacturer & factory SMR electric motor for conveyor belt helical gear speed reducer power transmission shaft mounted gear speed reducer With high quality best price
we have obtained the trust of buyers worldwide. a specialized supplier of a full range of chaEPG aims at playing a leading role in a market which keeps developing new competition strategies with regard to quality, economy and presence. This goal is to be reached by means of the joint support coming from all the company’s departments (Production dept., Technical dept. and Sales dept.) and a highly skilled worldwide distribution network.ins, sprockets, gears, gear racks, V-belts, couplings and reducers， pto shaft, agricultural gearboxes….
Overview
Quick Details
- Applicable Industries:
-
Building Material Shops
- Gearing Arrangement:
-
Helical
- Output TorqThe PTO shaft included with all Victory Tractor mowers has a longer extension than the typical PTO Shaft. The added length is necessary because of the far reaching movement of the mowers to the right of the tractor. ue:
-
256-7449N.m
- Input Speed:
-
1400rpm
- Output Speed:
-
100~400RPM
- Place of Origin:Zhejiang, China
- Brand Name:
-
OEM
- Color:
-
Blue / Grey / Customer requirement
- Warranty:
-
12 Months
- Product name:
-
Smr Shaft Mounted Reducer
- Certificate:
-
ISO9001
- Ratio:
-
5:13:20
- Heat treatment:
-
Quenching.etc
- Gear material:
-
20CrMnTiH Alloy Steel
- Efficiency:
-
92%~96% (Depends
Supply Ability
- Supply Ability:
- 2000 Set/Sets per Month
Packaging & Delivery
- Packaging Details
- Wooden case per pc + many pcs in big wooden case
- Port
- Shanghai/Ningbo port
Online Customization
SMR electric motor for conveyor belt helical gear speed reducer power transmission shaft mounted gear speed reducer
Product Description
Conveyor & Material Handling
Mining & Quarry
SMR Shafted mounted gearbox for conveyer systems
1) All gears are heat treated and fixed to achieve low noise and high output
EPG is specialized in design, manufacturer and sales of agricultural machinery and farm implements, which has an independent import and export rights. 2) Mounting dimensions are interchangeable with Fenner
|
SMR Model No. |
Output Shaft Bore [mm] |
Ratio(i) |
|
|
Standard |
Alternative |
||
|
B |
Φ30 |
Φ40 |
5:1 13:1 20:1 |
|
C |
Φ40 |
Φ50 |
|
|
D |
Φ50 |
Φ55 |
|
|
E |
Φ55 |
Φ65 |
|
|
F |
Φ65 |
Φ75 |
|
|
G |
Φ75 |
Φ85 |
|
|
H |
Φ85 |
Φ100 |
|
|
J |
Φ100 |
Φ120 |
|
Company Information
Certifications
Our Services
Packaging & Shipping
FAQ
: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:
