The working principle of the slider coupling

XINLAN sliderCouplingThe material of the parts can be 45 steel, and the working surface needs to be heat treated to increase its hardness; Q275 steel can also be used when the requirements are lower, without heat treatment.In order to reduce friction and wear, oil should be injected from the oil hole of the middle plate for lubrication during use.Because the half-coupling and the intermediate disc form a moving pair and cannot rotate relative to each other, the angular velocity of the driving shaft and the driven shaft should be equal.However, when working with relative displacement between the two shafts, the middle disk will generate a large centrifugal force, which will increase the dynamic load and wear.Therefore, when selecting, pay attention that its working speed should not be greater than the specified value.This kind of coupling is generally used at a speed n<250r/min, where the shaft has greater rigidity and no severe impact.The central sliding block is connected with the shaft sleeves on both sides by 90° oppositely distributed clamping grooves on both sides, so as to achieve the purpose of transmitting torque.The center sliding block and the shaft sleeve are matched with a slight pressure, which enables the coupling to run with zero clearance during the operation of the equipment.As the use time increases, the slider may lose its recoilless function due to wear, but the center slider is not expensive and easy to replace, and it can still play its original performance after replacement.

Slider couplings are often used in common motors, and can also be used to connect servo motors on individual occasions. The relative displacement can be corrected by the sliding of the center slider during use.Because the resistance to the relative displacement is the friction between the slider and the sleeve, the bearing load between them will not increase due to the increase in the relative displacement.

Our company’s products mainly include: various star-shaped elastic couplings, tire couplings, universal couplings, drum-shaped gear couplings, plum-shaped elastic couplings, rigid couplings, slider couplings Shaft, roller chain coupling, diaphragm coupling, elastic sleeve pin coupling, elastic pin coupling, elastic pin gear coupling, water pump coupling, etc.