WGT type connecting middle sleeve drum tooth type

WGT type-drum gear coupling with intermediate sleeve (JB/T7004-93)
　　The drum gear coupling is a rigid-flex coupling. The gear coupling is composed of an internal gear ring with the same number of teeth and a flange half coupling with external teeth.The external teeth are divided into straight teeth and drum teeth. The so-called drum teeth means that the external teeth are made into a spherical surface. The center of the spherical surface is on the gear axis. The tooth side clearance is larger than that of ordinary gears. Allows a larger angular displacement (compared to the straight tooth coupling), which can improve the contact conditions of the teeth, increase the torque transmission capacity, and prolong the service life.When the gear coupling is working, the two shafts produce relative angular displacement, and the tooth surfaces of the inner and outer teeth periodically slide relative to each other in the axial direction, which will inevitably cause tooth surface wear and power consumption. Therefore, the gear coupling must be in good condition. Work in a sealed state.Gear couplings have small radial dimensions and large load-bearing capacity. They are often used for shafting transmissions under low-speed and heavy-duty conditions. High-precision and dynamically balanced gear couplings can be used for high-speed transmissions, such as gas turbine shafting. transmission.Since the angular compensation of drum gear couplings is greater than that of straight gear couplings, drum gear couplings are widely used at home and abroad. Straight gear couplings are obsolete products, and those who choose should try not to use them. .The contact state along the tooth width when there is angular displacement.It has the ability to compensate for axis deviation in radial, axial and angular directions. It has the advantages of compact structure, small turning radius, large carrying capacity, high transmission efficiency, low noise and long maintenance period. It is especially suitable for low-speed and heavy-duty conditions, such as Metallurgy, mining, lifting and transportation industries, and also suitable for shafting transmission of various machinery such as petroleum, chemical industry, general machinery and so on.　　
　　The drum gear coupling produced by our company has complete varieties and specifications, and the models are:
GⅠCL, GⅠCLZ type-drum gear coupling (JB/T 8845.3－2001)
GⅡCL, GⅡCLZ type-drum gear coupling (JB/T 8845.2－2001)
GCLD type-drum gear coupling (JB/T 8845.1-2001)
WGP Type—Drum Gear Coupling with Brake Disc (JB/T7001－93)
WGC type—vertical installation drum gear coupling (JB/T7002-93)
WGZ type-drum gear coupling with brake wheel (JB/T7003-93)
WGT type—connecting to the middle sleeve drum-shaped gear coupling (JB/T7004-93)
TGL Type—Nylon Internal Gear Ring Drum Gear Coupling (JB/T5514－91)
WGJ type-drum gear coupling with intermediate shaft (JB/T8821-1998)
NGCL type—with brake wheel type (JB/ZQ4644-97)
NGCLZ type—with brake wheel type (JB/ZQ4645-97)
WG type—with brake wheel type (JB/ZQ4186－97)
CL type gear coupling (JB/ZQ 4218-86)
CLZ type gear coupling (JB/ZQ 4218-86)
NL Type—Nylon Internal Gear Ring Drum Gear Coupling (DB 3202-87)