XINLAN analyzes laminated spring coupling

Laminated springCouplingSeveral discontinuous sets of spring sheets are placed between the teeth of the two halves of the coupling to transmit movement and power.For easy processing, usually the teeth on the two halves of the coupling are individually made into cylindrical pins with tooth grooves, and each set of spring pieces is embedded in the tooth grooves of the two cylindrical pins, and fixed with a pin to form a separate spring assembly, and then installed In the hole of the flange of the coupling halves.The toothed cylindrical pin at the other end of the spring assembly is in clearance fit with the hole on the convex groove to compensate for the influence of the relative displacement of the two shafts.Another toothed cylindrical pin of the spring assembly is fixed with an elastic retaining ring.A bush made of wear-resistant material is usually pressed into the pin hole on the flange and lubricated to improve the wear resistance of the pin hole and the cylindrical pin.The laminated spring coupling is easy to assemble and disassemble, has high bearing capacity and good compensation performance. The allowable radial displacement is 0.5-1.3mm.However, this kind of coupling has a large external size, and the relative displacement of the two shafts causes a large additional load on the elastic element, and the distribution is not uniform.

Botou XINLAN Coupling Co., Ltd. is an enterprise specializing in the research and production of couplings.Our company has a variety of equipment and strong technical force. It is a manufacturer of various types of couplings. The main products are: various star- shaped elastic couplings, tire couplings, universal couplings, drum gears Type coupling, plum-shaped elastic coupling, rigid coupling, slider coupling, roller chain coupling, diaphragm coupling, elastic sleeve pin coupling, elastic pin coupling, Elastic pin gear coupling, water pump coupling, etc.