Introduction of Conical Bowl Coupling

Conical bowl springCouplingIt is composed of two half couplings, which are connected to each other by Lezi 2 with elastic elements. The elastic elements are cone-shaped bowl springs with gaps. They are installed in pairs on each pin with small ends. The pin with spring is arranged in the hole of one of the two half couplings.The spring is installed in the conical chamber facing the conical direction.The other end of the pin is fixed in the hole of the other half of the coupling.The notch on each spring is opened from the large cone end of the spring body, and the small cone end of the spring is rigidly connected by a sleeve and a pin.

       The torque is transmitted from the half coupling to the half coupling via the pin and spring.In the range of the gap between the sleeve and the cone and the small diameter, under the condition of maximum deformation of the spring, the pin is in direct contact with the half coupling body through the sleeve.

       When the load is reduced, the spring restores the pin to the original position, and the coupling allows a relative deviation of the angle between the two couplings.When the axial load is applied.One spring petal will deform. As for which spring deforms, it depends on the axial vibration of the load, which improves the working reliability and expands the use range of the structure.

Botou XINLAN Coupling Co., Ltd. is an enterprise specializing in the research and production of couplings.Our company has a variety of equipment and strong technical force. It is a manufacturer of various types of couplings. The main products are: various star- shaped elastic couplings, tire couplings, universal couplings, drum gears Type coupling, plum-shaped elastic coupling, rigid coupling, slider coupling, roller chain coupling, diaphragm coupling, elastic sleeve pin coupling, elastic pin coupling, Elastic pin gear coupling, water pump coupling, etc.