Installation and removal of flexible diaphragm coupling

Installation and removal of flexible diaphragm coupling     

       1. Wipe clean the dust and dirt on the surface of the installation shaft, and apply a thin layer of engine oil or lubricant. 2. Clean the inner hole of the flexible diaphragm coupling of Lingsi, and apply engine oil or lubricant. 3. The Lingsi flexible diaphragm coupling is inserted into the installation shaft; if the aperture is too tight, be careful not to hit the installation with a hammer or hard metal. 4. After the positioning is completed, first press the diagonal direction and use a torque wrench (tighten the specified Torque 1/4) Tighten the screw lightly. 5. Increase the strength (1/2 of the specified tightening torque) and repeat the fourth step. 4. Tighten the tightening torque according to the specified tightening torque for tightening and fixing. 6.*After , Tighten the fixing screws in the circumferential direction. 7. When disassembling, please proceed with the device completely stopped; loosen the locking screws one by one.