Hot products
breaking news
Some types of gear couplings in my country
When the gear coupling is working, the two shafts produce relative displacement, and the tooth surfaces of the internal and external teeth periodically slide relative to each other in the axial direction, which will inevitably cause tooth surface wear and power loss. Therefore, the gear coupling needs to be well lubricated and sealed Work in the state. ...
Installation and debugging steps of reel coupling
When installing, first put the outer cover and the sealing ring on the reducer side of the outer gear sleeve, and then heat the outer gear sleeve and put it on the output shaft of the reducer.Note that the heating temperature can be calculated and determined according to the amount of interference and the ambient temperature. ...
The working principle and use of chemical pumps
Before starting the pump, the suction pipe and pump must be filled with liquid.After the pump is turned on, the impeller rotates at a high speed, and the liquid in it rotates with the blades...
What is a torque limiter
Torque limiter (also called torque limiter, *coupling, *clutch) is a component that connects the active machine and the working machine. The main function is overload protection. The torque limiter is caused by overload or mechanical failure. When the required torque exceeds the set value...
Flange coupling product overview
Flange coupling (also called flange coupling) is the use of bolts to connect two flange (flange) disc type half couplings. The two half couplings are respectively connected with two shafts by keys to realize two shaft Connect...
Features of sector elastic coupling
The sector-shaped elastic coupling has significant vibration reduction and buffering functions, large axial, radial and angular compensation, energy saving, no noise, long service life, and convenient assembly and disassembly...
Industry Information
Technical Information
